|
KNX project file import
|
|
9
|
4393
|
September 24, 2025
|
|
KNX RGBW control acting crazy
|
|
12
|
77
|
September 20, 2025
|
|
KNX Cover without or overwrite position state address
|
|
7
|
38
|
September 15, 2025
|
|
KNX Secure has arrived on Node-Red
|
|
1
|
29
|
September 13, 2025
|
|
Short impulse to tilt venetian blinds (KNX/Warema)
|
|
4
|
1135
|
September 4, 2025
|
|
Using payload in template, on off works but percentage wont
|
|
6
|
36
|
September 3, 2025
|
|
Entity re-appears with wrong entity_id & name
|
|
8
|
127
|
September 3, 2025
|
|
Binary Sensor not updating when only sending 0 / OFF
|
|
2
|
31
|
August 30, 2025
|
|
Configuring Cover in KNX Addon
|
|
5
|
35
|
August 28, 2025
|
|
Porting KNX Home server to Home assistant
|
|
2
|
338
|
August 18, 2025
|
|
KNX Cover: behavior of cover.open_cover_tilt and cover.close_cover_tilt changed
|
|
4
|
480
|
August 17, 2025
|
|
KNX fails to load after upgrading to 2025.8.2
|
|
3
|
62
|
August 16, 2025
|
|
KNX - Generic Automation to control all your lights/switches, controlled by ETS Config
|
|
2
|
278
|
July 26, 2025
|
|
KNX device not showing up in entities
|
|
10
|
2149
|
July 22, 2025
|
|
Question about my knx automation to turn off xiaomi lights
|
|
4
|
38
|
July 20, 2025
|
|
Advanced control of any light entity from KNX (state, brightness, dim, temperature, color + states feedback)
|
|
62
|
11300
|
July 17, 2025
|
|
Input.number value to entity
|
|
1
|
32
|
July 16, 2025
|
|
KNX bus did not respond in time (although everything works)
|
|
10
|
145
|
July 12, 2025
|
|
KNX - How to set zones for one climate entity? HVAC system vs zone
|
|
4
|
37
|
July 10, 2025
|
|
Support sync_state for all device types
|
|
17
|
2712
|
July 9, 2025
|
|
Tutorial for fastest possible knx integration into home assistant
|
|
6
|
17314
|
June 30, 2025
|
|
Cool/heat thermostat for climate entities
|
|
1
|
158
|
June 30, 2025
|
|
Climate configuration in full: FAN, Oscillation, mode KNX
|
|
6
|
2251
|
June 29, 2025
|
|
KNX integration - can acces 'Entities' tab
|
|
3
|
69
|
June 24, 2025
|
|
KNX Integrate Busch Jaeger 6124 Room Temperature Controller in Cooling Mode
|
|
1
|
35
|
June 23, 2025
|
|
Setpoint shift for climate is not send to KNX bus
|
|
4
|
40
|
June 19, 2025
|
|
Support HA Devices from KNX YAML
|
|
2
|
44
|
June 18, 2025
|
|
Sensor Entity from KNX UI
|
|
0
|
32
|
June 17, 2025
|
|
Seeking advice: Best multi-split air conditioner for Home Assistant integration (Netherlands)
|
|
6
|
3016
|
June 14, 2025
|
|
EVCC MQTT KNX - How do I use HA as MQTT Broker to connect EVCC to KNX entity?
|
|
1
|
103
|
June 10, 2025
|