Legrand Arteor with Netatmo and Conbee II / HA support

Hardware
1

Hey guys,
Im just about to spend up large and put some Zigbee light switches/power switches in our house as we are rewiring it.

I was going to put in Xaiomi switches but I’ve just come across the HPM/ Legrand Arteor with Netatmo switches and I as wondering if anyone knows if they work with Conbee? Are they using standard Zigbee?

They are probably more suitable as I know they are certified in my Australia / New Zealand

1 Like
2

other kiwi here

hmmmmm
http://www.legrand.co.nz/uploads/tx_sbdownloader/Arteor_ZigBee_4pp_flyer_March2011_01.pdf
be looking into these also

mite just have to buy one try to make it work

1 Like
3

Nice, thanks I hadn’t seen those.
Ideally I want to not use their gateway and connect the Conbee directly to their switches. Ill check out that link and see if it any help.

4

Snap thats my thinking also

5

Hi,

If you want Legrand has a Zigbee family with several products (Celiane, Dooxie).
https://www.export.legrand.com/en/residential-connected-offer

I own many Celiane. They have inside power monitoring.

6

For the moment I use them (plug, switch, …) with an Raspberry Pi and a small board (for zigbee gateway) : https://shop.dresden-elektronik.de/raspbee.html.

When you start you need to have the Legrand gateway (to have the firmware update).
After you don’t have to use it anymore (or just for firmware upgrade).

Everyting works fine. I know people that use it with Domotica.
I 'll use it with Hass :grinning:

7

Hello,
I’m interested in this solution. My house has Legrand Celiane installed and I’m looking to upgrade them to the Netatmo connected range.

Did you also connect the roller shutter buttons?
I’d like to control and automate them from Hass.
I already have a conbee 2 up and running.

Do you have a description on how to discover and integrate in Phoscon?

Thank you!

8

Hey there , wich integration are you using in hassio? Any link would be apreciated, thx.

9

Hey Guys,
Thought I should update, I didn’t end up going with Legrand Neamo, the cost was too high, ridiculously high.

There is a rumor going around that PDL is bring in out their own Zigbee lights/switches in the very near future, for about 1/4 the cost so ill wait for the competition.