LG TV WebOS Pairing Problem

Hallo,

I have a pairing problem between the HASS and the LG 49UF695V-ZA TV.
The TV has 03.01.35 WEBOS version.
I didn’t find the popup window on the TV when I click to “Start Pairing Request”.
The TV and the Pi are using the LAN Network.

In the Log:
[homeassistant.components.media_player.webostv] Unable to connect to host 192.168.1.138 (this is the IP of the TV.)

I can pair the TV with my phone (LG webOS Magic Remote).
The phone is on the Wifi and the TV is on the LAN on the same router.

Do you have any idea about the solution?

Thank you,

tarat

One more information, the ping is working between the pi and the TV.

PING 192.168.1.138 (192.168.1.138) 56(84) bytes of data.
64 bytes from 192.168.1.138: icmp_seq=1 ttl=64 time=4.47 ms
64 bytes from 192.168.1.138: icmp_seq=2 ttl=64 time=2.41 ms

I have upgraded the hass from 0.42 to 0.45.1 and I have got a new message during the pairing process:

2017-05-25 09:14:47 ERROR (Thread-8) [pylgtv.webos_client] register failed to connect to ws://192.168.1.138:3000

I tried the telnet:

telnet 192.168.1.138 3000
Trying 192.168.1.138…
telnet: Unable to connect to remote host: Connection refused

I don’t know the telnet should work or not but the websocket doesn’t working.

Hi.
I have a LG TV with webos 4 and i can turn it off but i can’t turn it on. The error message is this:

2018-10-05 01:06:21 DEBUG (SyncWorker_11) [pylgtv.webos_client] send command to ws://192.168.1.64:3000
2018-10-05 01:06:21 DEBUG (SyncWorker_11) [websockets.protocol] client - state = CONNECTING
2018-10-05 01:06:26 DEBUG (SyncWorker_11) [pylgtv.webos_client] command failed to connect to ws://192.168.1.64:3000

Can you help?

Hi did you ever figure out a solution - same issue? thanks

If you found a solution I would be very thankful if you share it.