Hello!
I am new here. I made one automation, it work perfectly: If no motion detect, it decrease the brightness to 35%, and after 20 sec turn off light.
alias: '1'
description: ''
trigger:
- type: no_motion
platform: device
device_id: 4b5b000ccef06839d7c38eed22dacb87
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
domain: binary_sensor
condition:
- condition: state
entity_id: light.yeelight_ceiling1_0x5e7889a
state: 'on'
action:
- type: turn_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
brightness_pct: 35
- wait_template: ''
timeout: '20'
continue_on_timeout: true
- choose:
- conditions:
- type: is_motion
condition: device
device_id: 4b5b000ccef06839d7c38eed22dacb87
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
domain: binary_sensor
sequence:
- type: turn_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
brightness_pct: 100
default:
- type: turn_off
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
mode: single
If the brightness is 35% and it detect motion, the brightness immediately changed to 100%
I tired to combine it with “turn ON light” if it detect motion:
alias: '2'
description: ''
trigger:
- platform: state
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
condition: []
action:
- choose:
- conditions:
- type: is_motion
condition: device
device_id: 4b5b000ccef06839d7c38eed22dacb87
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
domain: binary_sensor
- type: is_power
condition: device
device_id: f8e08ace815fab5eeb9fdca12a332d5e
entity_id: sensor.house_solar_power_consumption_2
domain: sensor
below: 140
sequence:
- type: turn_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
brightness_pct: 100
- conditions:
- type: is_no_motion
condition: device
device_id: 4b5b000ccef06839d7c38eed22dacb87
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
domain: binary_sensor
- condition: device
type: is_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
sequence:
- type: turn_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
brightness_pct: 35
- wait_template: ''
timeout: '20'
continue_on_timeout: true
- choose:
- conditions:
- type: is_motion
condition: device
device_id: 4b5b000ccef06839d7c38eed22dacb87
entity_id: binary_sensor.mozgaserzekel_foldszint_elszoba_occupancy
domain: binary_sensor
sequence:
- type: turn_on
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
brightness_pct: 100
default:
- type: turn_off
device_id: e6a2bcc6e060ffae74aba27a716ed653
entity_id: light.yeelight_ceiling1_0x5e7889a
domain: light
default: []
mode: single
It works: turn on light, is solar producton below 140w
if no motion then brightness goes 35%, after 20 secs turn off
need help: if brightness is 35% and it detect motion, nothing happend, it stay 35%. After 20 secs the brightnrss goes 100%. it seems, the wait_template does not appear to be interrupted, it waits for 20 secs. What is wrong?
Thx
