Locked out of HA

brinzlee · December 15, 2021, 8:05pm

Hi can anyone help me with homeassistant
I have changed routers. I had a static ip of 192.168.0.50
I have now moved over to udm pro and need to set it back to dhcp so that I can reserve an address but I have no idea how to attack the cli using an hdmi lead to a monitor. I have looked at documentation but not sure what to type.
Many thanks

mwav3 · December 15, 2021, 8:28pm

I never had to do this but this should be the right command

rm -r /mnt/overlay/etc/NetworkManager/system-connections
reboot

Documentation at this link:

github.com

home-assistant/operating-system/blob/1e94f9a79e84253aa87f2daa91a255e9dcdb175b/Documentation/network.md#reset-network

# Network

Home Assistant Operating System uses NetworkManager to control the host network.

## Configure network

By default the device will be in DHCP state.

Basic network settings can be set through the Supervisor frontend in the System
tab. Advanced configurations such as VLAN are also available through the
`ha network` CLI command.

To restore the default configuration the `ha network` CLI command can be used as
well:

```
ha network update default --ipv4-method auto
```

If more advanced network settings are required network connection files can be

This file has been truncated. show original

brinzlee · December 15, 2021, 8:49pm

Thank you so very much. That has just saved Christmas…I am extremely grateful for your help…!!