Need a little help with Lutron and occupancy errors. I have various Lutron occupancy sensors in bathrooms, and automation in place on the Lutron side. However on the HA side, I cannot see events triggered by these occupancy sensors. If I debug the Lutron integration, I get the following. You can see the what I believe to be the occupancy event for the motion sensor, which is ID 9, and then you can see later the error for “Wrong number of args” for the motion sensor. Then you can see the Lutron automation performing its actions, but the motion sensor never updates in HA. Any idea where I could go from here? Or in general any idea where I could post to the developers responsible for this integration for some help?
2024-09-01 09:37:26.635 DEBUG (Thread-2) [pylutron] Updating 135(CSD 001): c=81 a=9 params=[1]
2024-09-01 09:37:26.635 DEBUG (Thread-2) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 1" num: 1 component_num: 81" Action: 9 Params: [1]"
2024-09-01 09:37:26.637 DEBUG (Thread-19) [pylutron] Updating 135(CSD 001): c=81 a=9 params=[1]
2024-09-01 09:37:26.637 DEBUG (Thread-19) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 1" num: 1 component_num: 81" Action: 9 Params: [1]"
2024-09-01 09:37:26.640 DEBUG (Thread-43) [pylutron] Updating 135(CSD 001): c=81 a=9 params=[1]
2024-09-01 09:37:26.641 DEBUG (Thread-43) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 1" num: 1 component_num: 81" Action: 9 Params: [1]"
2024-09-01 09:37:26.642 DEBUG (Thread-19) [pylutron] Updating 135(CSD 001): c=82 a=9 params=[1]
2024-09-01 09:37:26.643 DEBUG (Thread-19) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 2" num: 2 component_num: 82" Action: 9 Params: [1]"
2024-09-01 09:37:26.644 DEBUG (Thread-2) [pylutron] Updating 135(CSD 001): c=82 a=9 params=[1]
2024-09-01 09:37:26.645 DEBUG (Thread-2) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 2" num: 2 component_num: 82" Action: 9 Params: [1]"
2024-09-01 09:37:26.646 DEBUG (Thread-43) [pylutron] Updating 135(CSD 001): c=82 a=9 params=[1]
2024-09-01 09:37:26.647 DEBUG (Thread-43) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 2" num: 2 component_num: 82" Action: 9 Params: [1]"
2024-09-01 09:37:26.666 DEBUG (Thread-2) [pylutron] Updating 135(CSD 001): c=85 a=9 params=[1]
2024-09-01 09:37:26.667 DEBUG (Thread-2) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 5" num: 5 component_num: 85" Action: 9 Params: [1]"
2024-09-01 09:37:26.669 DEBUG (Thread-19) [pylutron] Updating 135(CSD 001): c=85 a=9 params=[1]
2024-09-01 09:37:26.669 DEBUG (Thread-19) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 5" num: 5 component_num: 85" Action: 9 Params: [1]"
2024-09-01 09:37:26.670 DEBUG (Thread-43) [pylutron] Updating 135(CSD 001): c=85 a=9 params=[1]
2024-09-01 09:37:26.671 DEBUG (Thread-43) [pylutron] Keypad: "CSD 001" LED keypad: "CSD 001" name: "LED 5" num: 5 component_num: 85" Action: 9 Params: [1]"
2024-09-01 09:37:29.226 DEBUG (Thread-2) [pylutron] Wrong number of args for MotionSensor update 2
2024-09-01 09:37:29.228 DEBUG (Thread-19) [pylutron] Wrong number of args for MotionSensor update 2
2024-09-01 09:37:29.230 DEBUG (Thread-43) [pylutron] Wrong number of args for MotionSensor update 2
2024-09-01 09:37:29.268 DEBUG (Thread-2) [pylutron] handle_update 163 -- ['1', '75.00']
2024-09-01 09:37:29.268 DEBUG (Thread-2) [pylutron] Updating 163(Toilet Light): s=1 l=75.000000
2024-09-01 09:37:29.272 DEBUG (Thread-19) [pylutron] handle_update 163 -- ['1', '75.00']
2024-09-01 09:37:29.272 DEBUG (Thread-19) [pylutron] Updating 163(Toilet Light): s=1 l=75.000000
2024-09-01 09:37:29.273 DEBUG (Thread-43) [pylutron] handle_update 163 -- ['1', '75.00']
2024-09-01 09:37:29.273 DEBUG (Thread-43) [pylutron] Updating 163(Toilet Light): s=1 l=75.000000
2024-09-01 09:37:29.280 DEBUG (Thread-43) [pylutron] handle_update 163 -- ['29', '10']
2024-09-01 09:37:29.280 DEBUG (Thread-2) [pylutron] handle_update 163 -- ['29', '10']
2024-09-01 09:37:29.282 DEBUG (Thread-19) [pylutron] handle_update 163 -- ['29', '10']
2024-09-01 09:37:29.283 DEBUG (Thread-2) [pylutron] handle_update 163 -- ['30', '1', '75.00']
2024-09-01 09:37:29.283 DEBUG (Thread-19) [pylutron] handle_update 163 -- ['30', '1', '75.00']
2024-09-01 09:37:29.284 DEBUG (Thread-43) [pylutron] handle_update 163 -- ['30', '1', '75.00']
2024-09-01 09:37:29.335 DEBUG (Thread-2) [pylutron] handle_update 165 -- ['1', '100.00']
2024-09-01 09:37:29.335 DEBUG (Thread-2) [pylutron] Updating 165(Toilet Ex.Fan): s=1 l=100.000000
2024-09-01 09:37:29.338 DEBUG (Thread-43) [pylutron] handle_update 165 -- ['1', '100.00']
2024-09-01 09:37:29.338 DEBUG (Thread-43) [pylutron] Updating 165(Toilet Ex.Fan): s=1 l=100.000000
2024-09-01 09:37:29.339 DEBUG (Thread-19) [pylutron] handle_update 165 -- ['1', '100.00']
2024-09-01 09:37:29.339 DEBUG (Thread-19) [pylutron] Updating 165(Toilet Ex.Fan): s=1 l=100.000000