That kinda defeats the purpose of having a community forum. The other post is more about hardware modding and such. I’m asking questions about stuff that’s been gone over in this post already. Why even make a forum post if you don’t want people to interact with it? Why isn’t it a locked thread? Why am I having this conversation with you instead of getting the information I asked for?
@wbarber69 Don’t get me wrong… but read the 1st topic of this thread please…this thread is NOT the technical support thread, this is a list for the models supported by the main thread only…
And since me nor @paddy0174 are moderators, neither one of us can lock this thread…
1 Like
Manufacturer: Giatsu
Model: AROMA2R32
Modelnumber: GIA-S09AR2B-R32-I
Year: 2020
Market: PT, ES
2nd unit with higher output power:
Manufacturer: Giatsu
Model: AROMA2R32
Modelnumber: GIA-S18AR2B-R32-I
Year: 2020
Market: PT, ES
Everything works fine out of the box. I bought the iot-uni-dongles from dudanov on the tindie shop.
2 Likes
Thanks so much for this! Works on my Pioneer WS009GMFI17HLD.The thermostat for this unit is horrible about staying reasonably close to the set temperature, and this made it so I could automate my own thermostat! Life is much better
1 Like
Manufacturer: Royal Clima (Midea)
Model: Triumph Inverter
Year: 2021
Market: RU
Model ID: RCI-TN29HN (Wi-Fi Ready)
I install 2 ac. One with ESP01+Adapter and another with wemos d1 mini v3 + shifter
All work great. Thanks a lot
2 Likes
Manufacturer: MaxiCool (Midea)
Model: AMD-AUR-09HDI
Year: 2020
Market: EU
Installed in 3 A/C units,all with ESPHOME ESP01S+Adapter
All work great. Thanks.
2 Likes
Manufacturer: Simando/Dimstal (Midea/Coolix)
Model: SMND-PAC-12
Year: 2020
Market: EU
2 Likes
I’m trying to make my Mr Cool diy 12k working so far all I get is unknown for everything and it shows 32°F any ideas as to what I’m doing wrong? I’ve swapped TX and Rx to no help.
Brand: kentatsu
Model: ksgi26hfan1
Year: 2021?
Market: RU
1 Like
I finally got to update this list. 
Sorry for the wait!
All devices named in posts above are now added to the list (=this is only to remind me 
)
Thanks to all, that keep adding their models! 
Hi,
I want to confirm that it works too with:
#1
Brand: Rotenso
Model: Ukura (U35Wi/o)
Year: 2020
Market: PL
Basically any A/C that can take in OSK103 (or newer OSK105) will work with midea-ac & esphome.
For ESP-Module Dongle info: GitHub - dudanov/iot-uni-dongle: An project of universal minimalistic Wi-Fi dongle for various IOT appliances controlled via UART. (On photo my module based on iot-uni-dongle circuit)
Here is some more info about the USB cable adapter:
USBpin -- color -- function
1 -- Red -- +5V
2 -- Orange -- Uart Rx (ESP8266: GPIO3) (receive data from A/C)
3 -- Brown -- Uart Tx (ESP8266: GPIO1) (send data to A/C)
4 -- Black -- GND (0V)
On the display board there is JST XH 4pin 2.5mm pitch (you can buy from ali a box with those for ~2-3$)
USB pinout is here: Universal Serial Bus (USB) - HwB
You can use some USB-A extension cable, USB-OTG cable and cut off other side, or just solder wires to USB-A socket 
and crimp JST XH terminals on wires.
And here is my module from bottom with added description of signals:
An here one more photo:
2 Likes
Hi,
The following AC is working with this component:
Brand: Airfel
Model: LTXN35UBV1B/LRXN35UBV1B
Year: 2019(?)
Market: HU
(There is an other model with lesser performance: Airfel LTXN25UBV1B/LRXN25UBV1B, I think it is the same electronics, so it has to work)
Best regards!
2 Likes
Hey,
I found a model working on the German market. It is working perfectly with the Wifi dongle
It’s the Midea Real Cool 35
Brand: Midea
EAN: 4048 164 10826 8 (Real Cool 35)
Year: 2021
Market: DE
It’s a little hard to get to the module. If interested I can add more pictures and instructions on the procedure.
Thanks to @dudanov for the excellent module! AC is working flawlessly.
Cheers
4 Likes
Just wanted to confirm this is also working with my Samsung 3.5kW aircon-unit which is another Midea spin-off:
Brand: Samsung
Model: AR12TXHQASIN
Year: 2022
Market: UK (EU)
Using the ESPhome controller USB wifi adapter - SLWF-01pro Air conditioner Wi-Fi module for Midea, Idea, Neoclima, Electrolux, Beko and many more. Model SMARTLIGHT SLWF-01pro (v.1.0)
2 Likes
From Telegram:
Brand: Ballu
Model: BSY/in-12HN8/ES_21Y
Year: ??
Market: UK (EU)/UA
@paddy0174 time to update the main post?
1 Like
Please append to support list
Zanussi ZACS/i-09 HS/N1
With esp01 and special adapter uart board.
1 Like
Manufacturer: Mitsui
Model: TRENDLINE (12000)
Year: 2022
Market: EU
Model ID: MTXI12HP24
Manufacturer: Mitsui
Model: TRENDLINE (18000)
Year: 2022
Market: EU
Model ID: MTXI18HP24X
1 Like
Manufacturer: Royal Clima
Model: RCI-TMN09HN
Year: 2022
Market: RU
1 Like
Manufacturer: Carrier
Model: 42HVA1801E / 53HVA1801E
Market: Argentina, Latin America
Manufacturer: Carrier
Model: 42HVA0901E / 53HVA0901E
Market: Argentina, Latin America
Manufacturer: Carrier
Model: 42HVA1201E / 53HVA1201E
Market: Argentina, Latin America
1 Like