I have the same air conditioner, is this a plug & play device or do I need to alter wires or code?
And what is the (Android) app for being able to use it?
Welcome to this forum!
Please be so kind and re-read the first post (or the one above yours). This is a thread to keep a list of known working devices. This thread is not for asking questions! There is a specific thread for this, you can find the link in the first post or the post above yours.
Thanks!
Midea All Easy Pro Nordic UV MSEPBU-12HRFN8-MOX330-12HFN8-UV
Manufacturer: Midea
Model: UV MSEPBU-12HRFN8-MOX330-12HFN8-UV
Market: Romania, Europe
All works ok, ofc i had to add more stuff to esphome but is all good
Hi,
I’m very interesting to integrate my new Real Cool 35 into Homeass like you did.
Please give me more pictures and instruction.
Best regards from Austria
Welcome to the community!
This thread is ONLY for listing the models, questions shall be asked in the corresponding thread, you can find here:
Please ask there or let your post move from one of the moderators!
All the best from the neighbouring Bavaria!
Manufacturer: Midea
Model: U
Year: 2020
Market: US
Model ID: MAW08V1QWT
Works fine on my Midea U
I’ll gladly post some pictures. Just need to know where is appropriate.
Thank you for asking!
Would you mind posting the pics in the Midea discussion thread? That would be great. If I see your post popup in the other thread I’ll send @redpersian a short PM to link her/him to your new post. and ask a moderator to delete the posts in this thread!
Thanks a lot, much appreciated!
Brand: Midea
Model: Breezeless+
Model ID: MSFA1-09N8D6-I
Year: 2022
Market: RU
Works Good.
Notes:
Huminity always 0, despite it present.
Power show room unit consumption i.e. 2-6W
External unit temperature works.
Brand: MRCOOL
Model ID: DIY-24-HP-WMAH-230C25
Year: 2022
Market: US
Works fine!
Brand: Carrier
Model: Extreme 42QHG012D8SX
Year: 2021
Market: GR
everything works fine
esp12f
My unit’s original dongle was 103 version and is working fine with “midea ac lan” .
I had the opportunity to use an esp dongle as well, and it works fine!
Brand: Senville
Model: Aura
Year: 2023
Market: CA
Model ID: SENA-18HF-Q
Power and Humidity always show 0.
That minisplit model doesn’t have power monitoring or a humidity sensor. I just edited the esphome config and disabled those sensors.
I’m about to buy an aircon and I’m looking at the Midea Xtreme range. I don’t see it on the list. Has anybody here installed one and successfully integrated it?
I have a Senville SENA12HF and also have no Power or Humidity. However, the ‘Inquiry’ function of the remote does report both power and humidity as well as lots of other data. Not sure what this means but I would like to have them…
- Brand - MrCool
- Model - Minisplit DIY MultiZone AC/Heatpump 9k BTU
- Year - 2022
- Market - US
- Model ID - DIY-09-HP-WMAH-230C25
I’m planning on testing the 12k and 18k BTU later at some point. I believe it’s safe to say those will work as well. I plan on posting in this thread my working solution.
Brand: Eluxe (brand of HTW)
Model: Amber R32
Year: 2023
Market: EU
Model ID: ELS071AMBR32
Power and Humidity always show 0.
“Silent” fan mode doesn’t seem to work. Fan mode changes don’t always work as expected