Manufacturer: Royal Clima
Model: Triumph Inverter
Year: 2021
Market: RU
Model ID: RCI-TM09HN
No issues.
2 Likes
I can confirm the following unit also works:
Manufacturer: Midea
Model: Mission Pro
Year: 2019
Market: EU
Model ID: MSMBAU-09HRFN8
I also had two 2021 units installed this week. Will confirm later if these work as well once I receive the dongles for those.
I raised an issue on the repo of reneklootwijk to reflect this as well
1 Like
Confirmed:
Manufactured: Inventor
Model: Supreme
Year: 2021(?)
Market: EU
Model ID: SVI32-09WFI
Had to upload the sketch, delete the esphome yaml and add it again to work. If I didn’t, it wouldn’t get a response. With a d1 mini, logic converter and uart on pins 4&5(D1&D2)
2 Likes
Sorry this is not tested. Please delete it from the list
1 Like
Confirmed:
Brand: Kaisai
Model: Fly
Year: 2021
Market: EU
ID: KWX-12HRBI
1 Like
I can confirm my 2021 models work as well. Same Model ID
1 Like
Manufacturer: Midea
Model: MSAFA-09HRN1
Year: 2020
Market: UA
Link
Manufacturer: Idea
Model: ISR-12HR-MA0-DN1
Year: 2020
Market: UA
Link
Manufacturer: Midea
Model: Forest DC AF-12N1C2-I
Year: 2019
Market: UA
Link
Manufacturer: Neoclima
Model: NS/NU-07AHEw
Year: 2019
Market: UA
Link
Manufacturer: Neoclima
Model: NS/NU-09AHEw
Year: 2019
Market: UA
Link
1 Like
As you were kind enough to provide links to the manufacturer websites, I took the liberty and changed your first entry from “Idea” to “Midea”. Just as FYI in case you want to change it in your post as well. 
Thanks for reporting!
yes, made missprint. thanks for point out, corrected in my post.
1 Like
Manufacturer: Qzen
Model: ZE-12WSE
Year: 2020
Market: HR
1 Like
Manifacturer: Ariston
Model: Nevis
Year: 2019
Market: IT
Confirmed Working with Ariston’s Wifi dongle.
2 Likes
I have to ask, what is “Aristons WIfi dongle”? Is that a manufacturer dongle running the ESPHome firmware?
No it’s the manifacturer dongle running its own firmware, working with Mac-Zhou integration. If this list was only for the ESP, then I’m sorry, I misunderstood and I’ll delete my posts
Not a problem at all. Yes, this list is only for the ESPHome custom_component to run without a manufacturer dongle (= own ESP board).
We just wanted to show, how many A/Cs are usable without a manufacturer dongle, to make it easier for people to select an A/C that is usable with HA before buying.
PS: Just leave your posts, doesn’t matter, I’ll just take your device off the list and all is good.
in case you still search for a way to control toshiba devices - this may have you covered: GitHub - h4de5/home-assistant-toshiba_ac: Toshiba AC integration into home-assistant.io
1 Like
Could you give a little more information on how you did this? I have a MrCool and it has the weird USB connector. I purchased a dongle from @sergge but I think I need to create something similar to yours. Where did you get the USB connector from? Did you have to modify it?