MQTT + Sonoff + Curtain

[boggiano]

I set a Sonoff 4ch pro with Tasmota in order to use it with the engine of the window Shading cover on the terrace.
I installed Mosquitto on my RPi and a two binary switches (one for each channel) in order to test the interlock mode of the Sonoff: everything is working fine.
(I used two bulbs just as test! )

Now, I really missed the parts:

• How I say to Sonoff channel_1 :“hey, give power for 65 seconds in order to open all the cover”?
• How I say to Sonoff channel_2 :“hey, give power for 75 seconds in order to close all the cover”?
• How con I ask to Sonoff: “how many % is the cover opened/closed ?”

The cover can be used with a couple of buttons too, so I suspect it’s not always possible to know the status of the cover? Right ?

Thank you, very much: I am totally lost here.

[boggiano]

Sonoff Dual Window Cover with set position

Hello, I worked on the Sonoff Dual that I installed the firmware Sonoff-Tasmota. I’ve integrated it with Home-Assistant using MQTT commands. You can set a Window Cover position from the Window Set Position which is converted from 0-100 to 0-16. I’ve set the timer 2 seconds more (18 sec) in order to go fully down or up. The Window Position is the current position of the Window Cover that is changed with the MQTT Commands (ON/OFF). If all automations are working correctly, you don’t have to cha…