Just want to show off 1 room of my house that home assistant has Control of…
TV panasonic 65"
1= broadlink
2= IR repeater (going into cabinet
kick board slides out hiding all the cabling
how I get all my IR codes into home assistant
wemos with a IR shield on it with Tasmota on it
https://wiki.wemos.cc/products:d1_mini_shields:ir_controller_shield
my IR gas heater
one of many 433 switch talking to sonoff RF with tasmota on it
with the bluetooth sensor also have one in lounge hall master bedroom and bath room.
thanks to Intermit.tech
gas heat is control by the
- platform: broadlink
host: bla.bla.bla.bla
mac: 'bla.bla.bla.bla'
timeout: 15
switches:
gas_heater:
friendly_name: "Gas Heater"
command_on: 'JgBIAAABK5MVEBQ2FRAVERQRGQwUERQ2FRAVNhQ2FRAVEBkyFTUUERURFDYUERQRFDYUERURFDYUNhQRFTYUNhQRFDYVMBgTFAANBQ=='
command_off: 'JgBIAAABKZUSExI3ExMSExIUEhMSExI4EhMSORI4EhMSExI5EjgSExI4EhAWOBI4EhMSExIUEjgSExI4EhMSFBI4EjgSORITEgANBQ=='
gas_control:
friendly_name: "Gas Control"
command_on: 'JgBIAAABKpQTExI4EhQRFBETExMSExI4EhQROBM3ExMSExE5EzcTExM3EhQRFBI4EhMSExIUETkSEhM3EzgSExM3EzcWNRIUEgANBQ=='
command_off: 'JgBIAAABKY8ZEhM3ExMSExEUEhMTEhM3ExMSOBI4ExISExM4EjgTEhITEzgSOBMSExITEhMTEjgSOBMSExITOBI4EzcTNhQTEgANBQ=='
gas control on is GAS UP on the ir remote
gas control off is GAS down on the ir remote
now joining all the bits
the 433 switch on the gas heater is the manual switch to turn on the lounge climate control.
#=======================================================================
#
#=======================================================================
- id: Gas Heater Toggle
alias: Gas Heater Toggle
initial_state: 'on'
trigger:
- entity_id: sensor.last_rf
platform: state
to: '112694'
condition: []
action:
- data:
entity_id: switch.gas_heater
service_template: >
{%- if (states.switch.gas_heater.state == 'off') -%}
switch.turn_on
{%- else -%}
switch.turn_off
{%- endif -%}
- data:
entity_id: climate.gas_heater , climate.hall_heater
service_template: >
{%- if (states.switch.gas_heater.state == 'on') -%}
climate.turn_on
{%- else -%}
climate.turn_off
{%- endif -%}
have this
template:
- platform: template
sensors:
garage_car_present:
value_template: >
{% set Car = states('sensor.car_spot_1')|int(1000) %}
{% if (Car<200) %}
Home
{% else %}
Away
{% endif %}
gasheater:
value_template: >-
{% if is_state("sensor.day_night", "Night") and is_state('media_player.mckillentv', 'on') and
is_state('switch.lava_lamp', 'on') and is_state('sensor.am_pm', 'PM') %}
on
{% else %}
off
{% endif %}
for gas heater to turn on automatly
must be Night and TV on and Lava Lamp ON
- id: Gas Heater ON If TV ON
alias: Gas Heater ON If TV ON
trigger:
- entity_id: sensor.gasheater
platform: state
to: 'on'
condition: []
action:
- data:
entity_id: climate.gas_heater
service: climate.turn_on
- data:
entity_id: climate.hall_heater
service: climate.turn_on
- data:
entity_id: climate.gas_heater
temperature: '22'
service: climate.set_temperature
the lovelace look
now the Ir remote
I Have this sensor
#=======================================================================
#
#=======================================================================
- platform: mqtt
name: "Last IR"
state_topic: "tele/IR/RESULT"
value_template: '{{value_json.IrReceived.Data}}'
expire_after: 1
qos: 1
after 1 sec the sensor goes back to unknown (great to toggling a light )
so pressing the pause on the remote
- id: Kodi Pause
alias: Kodi Pause
trigger:
- entity_id: sensor.last_ir
platform: state
to: '1908312'
condition: []
action:
- data_template:
entity_id: media_player.{{ states.input_select.kodi_machine.state}}
service: media_player.media_play_pause
kodi pause/play
red button press
- id: RED IR
alias: RED IR
trigger:
- entity_id: sensor.ir_codes
platform: state
to: RED
condition: []
action:
- data:
entity_id: light.kitchen
service: light.toggle
- data:
payload: IR-RED
topic: IR/CODES
service: mqtt.publish
as I have a SKY the CH does nothing
well it now ups the gas heater up/down
- id: CH DIM DOWN
alias: CH DIM DOWN
trigger:
- entity_id: sensor.ir_codes
platform: state
to: DOWN
action:
- data:
payload: IR-DIM DOWN
topic: IR/CODES
service: mqtt.publish
- service: script.turn_on
entity_id: script.gas_down
- id: CH DIM UP
alias: CH DIM UP
trigger:
- entity_id: sensor.ir_codes
platform: state
to: UP
action:
- data:
payload: IR-DIM UP
topic: IR/CODES
service: mqtt.publish
- service: script.turn_on
entity_id: script.gas_up
I have dyslexia writting this is heaps hard and than writting some yaml script automation code
see clear as mud
hope it make cents.
and a set in my car to bypass the garage doors rolling code with a cheep tasmote’d garage door opener.