I have various usb dongle to connect the HASSIO to different technologies. are the names ttyUSB0,ttyUSB1 etc consistent? Is there a way to list USBs connected to the Raspberry? Michele

if you’re trying to see what’s connected do a ls /dev/acm* or ls /dev/ttyUSB*

I’m testing it on a RPi 1 doesn’t work in the console_ssh addon (ssh root@hassio.local) but only on the debug console I have to use the debug console instead but my question in about consistency: if I reboot ttyUSB0 is allways the same fisical adapter or it can change? look at: http://hintsho…

If you’re not going to have 1 at a time or 1 only then the device should stay the same. It usually will only change when there is another plugged in after another. You could do udev rules like your link if you want and then you’d know exactly what the device name would be. It shouldn’t be a problem …

[image] Persistant USB names Home Assistant OS What I did was ssh to the host and ran ls -al /dev/serial/by-id. That will list all of your serial devices and their symlinks to the /dev/tty* device. Just update your Home Assistant config to point to the correct device usi…

Naming USB

Installation Home Assistant OS

NotoriousBDG December 27, 2017, 4:25pm 5