I’m running HA under Proxmox and have 2 UPS’s connected:
Back-UPS RS 1500G FW:865.L6 .D USB FW:L6 (1-3.4.2)
Back-UPS RS 1000MS FW:950.e5 .D USB FW:e5 (1-4)
I can’t figure out how to get HA to recognize both. It recognizes only 1, and which one it recognizes depends (I think) on which one I last added to the VM’s USB hardware list.
I tried reading the instructions and threads here about multiple devices (- name: ups1, etc.) but it’s beyond me.
Anyone know how to make this work?
More system info:
Subsystem:
usb
Device path:
/dev/bus/usb/002/008
Attributes:
BUSNUM: '002'
DEVNAME: /dev/bus/usb/002/008
DEVNUM: '008'
DEVPATH: /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-3
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-pci-0000_01_1b_0-usb-0_3
ID_MODEL: Back-UPS_RS_1000MS_FW:950.e5_.D_USB_FW:e5
ID_MODEL_ENC: >-
Back-UPS\x20RS\x201000MS\x20FW:950.e5\x20.D\x20USB\x20FW:e5\x20\x20\x20\x20\x20
ID_MODEL_ID: '0002'
ID_PATH: pci-0000:01:1b.0-usb-0:3
ID_PATH_TAG: pci-0000_01_1b_0-usb-0_3
ID_REVISION: '0090'
ID_SERIAL: >-
American_Power_Conversion_Back-UPS_RS_1000MS_FW:950.e5_.D_USB_FW:e5_0B2136N01654
ID_SERIAL_SHORT: 0B2136N01654
ID_USB_INTERFACES: ':030000:'
ID_USB_MODEL: Back-UPS_RS_1000MS_FW:950.e5_.D_USB_FW:e5
ID_USB_MODEL_ENC: >-
Back-UPS\x20RS\x201000MS\x20FW:950.e5\x20.D\x20USB\x20FW:e5\x20\x20\x20\x20\x20
ID_USB_MODEL_ID: '0002'
ID_USB_REVISION: '0090'
ID_USB_SERIAL: >-
American_Power_Conversion_Back-UPS_RS_1000MS_FW:950.e5_.D_USB_FW:e5_0B2136N01654
ID_USB_SERIAL_SHORT: 0B2136N01654
ID_USB_VENDOR: American_Power_Conversion
ID_USB_VENDOR_ENC: American\x20Power\x20Conversion
ID_USB_VENDOR_ID: 051d
ID_VENDOR: American_Power_Conversion
ID_VENDOR_ENC: American\x20Power\x20Conversion
ID_VENDOR_ID: 051d
MAJOR: '189'
MINOR: '135'
PRODUCT: 51d/2/90
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 0/0/0
USEC_INITIALIZED: '168782717'
Thank you.