Nvidia Orin Nano + Google Edge Coral M.2 OK (1 tpu only)

Installation
1

Hi !

Just to inform you that the Nidia Jetson Orin Nano can host a M.2 Google Coral Edge TPU.
There is one lane only so my dual TPU is not completely recognized.
I’ll test a riser later.

root@nano:~$ lspci -nn
[...]
0001:01:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]
[...]

root@nano:~$ cat /boot/extlinux/extlinux.conf
[...]
      APPEND ${cbootargs} root=PARTUUID=7866b72b-2a9b-4bc2-b613-04bf1929aaee rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nv-auto-config pcie_aspm=off gasket.dma_bit_mask=32 

root@nano:~$ ls -la /dev/apex_0 
crw-rw---- 1 root apex 120, 0 avril 29 11:53 /dev/apex_0