Oomi Multisensor 6 - could not save node config options (similar to Aeotec Multisensor 6)

Configuration Z-Wave
1

Hi,

I bought 2 new Oomi Multisonsors: http://www.oomi.com/discover/multisensor/

They are the same like “Aeotec Multisensor 6”

OpenZWave knows the specification: https://github.com/OpenZWave/open-zwave/blob/master/config/oomi/ft100.xml

but they are recognized as "Oomi Unknown: type=0002, id=0064 (Node:11 Complete)"

they are working fine, but I can’t set any zwave config parameter.

Any idea how I can fix this?

2

Hi

Funny, I just had the same problem. I have the same problem. I have tried to refresh and heal the node a couple of times, but no solution. What parameters are you planning to set?

Cheers,

JM

3

great to have another affected user :sweat_smile:

  • command 5: send Sensor Binary Report CC
  • command 41: threshold change in temperature to induce an automatic report.

these 2 would be helpful.
I think it is not that difficult to fix this in OpenZWave or HA for someone who knows where to start.

cheers

4

does anyone have an idea? If not, I’ll have to return the devices

5

Hi again,

It seems like the Oomis are missing configuration files in the github library you are linking to. I have the same problem with the wallmote from Oomi, but I have found a workaround. I have stopped the homeassistant service and then added the missing configuration in the zwcfg_****.xml file. I found the a thread in for the wallmote here Aeotec wallmote quad zw130.

I have the aeotec version of the same sensor and that works fine.

Br,

JM

6

i have now replaced the config part of my node in zwcfg_***.xml with the new from here: https://github.com/OpenZWave/open-zwave/blob/master/config/oomi/ft100.xml

all in “CommandClass”

after adding the details from “manufacturer_specific.xml” it seems to work now, but I can’t update the “Node config options” this ist the log output.

After setting the parameter “Temperature Reporting Threshold” to “20”, the parameter reverts back to “5121”
here’s the log snip: https://pastebin.com/CVvPvTW7

sometimes I can see the following:
"Unhandled Command Class 0x20"
don’t know if that’s related to the issue

7

I gave up and bought the Aeotec Multisensor 6. This thing works out of the box for now.
Returned the Oomi Multisensor.

Update:

The new Aeotec Multisensor 6 working fine out of the box. Just before I returned the Oomi Sensors I flashed my Aeotec Multisensor 6 with the newest firmware and I thought if they are both the same, why not try to flash the Aeotec Multisensor 6 to the Oomi Multisensor 6. :thinking::thinking:

And guess what, flashing the newest Aeotec firmware to the Oomi sensor works fine and after a reset, it appears as a Aeotec Multisensor 6 :sunglasses:

no need to struggle with zwave configs and logs, just flash the device with the current firmware and the Aeotec tool from Aeotec homepage.

8

Hello @b3m3
Just a quick follow-up: What firmware version did you update to, and do you have the Multisensor(s) powered by USB of battery?

9

hey, I just used the latest Aeeotec FW that’s available at the time. I’m running my nodes on battery. hone it helps

10

Thank you for a quick response