PCIe slots not recognized in Linux

Configuration
1

Hello, trying to install Frigate and can’t seem to get my PCIe slots to be visible. Think I’ve missed something during my setup. This is my first time using Linux and docker, any help would be appreciated.
Installed:
Docker Desktop WSL 2
Ubuntu 22.04.2 LTS
Portainer. io
Followed the coral steps until step 5 & lspci -nn | grep 089a which results with nothing
HP Precision 3620 PC
Coral mini PCIe in a PCI adaptor installed
NVIDIA Quadro K1200 card installed
BIOS shows 4 slots. VGA Compatible for the NVIDIA Card and Unclassified for the Coral. In the miscellaneous “Enable PCI Slot” is checked. Didn’t see anything else related.
Windows recognizes the coral in the device manager.

jimmy@Jimmy-BI:~$ lspci
076c:00:00.0 3D controller: Microsoft Corporation Device 008e
cb2e:00:00.0 3D controller: Microsoft Corporation Device 008e

Was going to uninstall everything and start over, but thought I’d check with the group before going down that road.

Thanks

2

so you installed the coral drivers, right?

3

Yes followed Get started with the M.2 or Mini PCIe Accelerator | Coral up to step 5.

4

what does ls /dev/ show?

5 
autofs           kmsg          mem    ram12  ram9    shm     tty14  tty24  tty34  tty44  tty54  tty7     vcsa1
block            loop-control  net    ram13  random  stderr  tty15  tty25  tty35  tty45  tty55  tty8     vcsu
bsg              loop0         null   ram14  rtc0    stdin   tty16  tty26  tty36  tty46  tty56  tty9     vcsu1
btrfs-control    loop1         nvram  ram15  sda     stdout  tty17  tty27  tty37  tty47  tty57  ttyS0    vfio
console          loop2         ppp    ram2   sdb     tty     tty18  tty28  tty38  tty48  tty58  ttyS1    vhost-net
cpu_dma_latency  loop3         ptmx   ram3   sdc     tty0    tty19  tty29  tty39  tty49  tty59  ttyS2    vsock
cuse             loop4         pts    ram4   sdd     tty1    tty2   tty3   tty4   tty5   tty6   ttyS3    zero
dxg              loop5         ram0   ram5   sg0     tty10   tty20  tty30  tty40  tty50  tty60  urandom
fd               loop6         ram1   ram6   sg1     tty11   tty21  tty31  tty41  tty51  tty61  vcs
full             loop7         ram10  ram7   sg2     tty12   tty22  tty32  tty42  tty52  tty62  vcs1
fuse             mapper        ram11  ram8   sg3     tty13   tty23  tty33  tty43  tty53  tty63  vcsa
6

Did you try the troubleshooting steps from the coral install page?

7

So you are trying to install a pcie coral in a docker container inside ubuntu wsl inside windows?

Madness.

2 Likes
8

Oh shoot I didn’t catch that wsl detail. Yeah, good luck with that would be what I say, I’ve never seen anyone get it working in wsl

1 Like
9

I’ve gone around in circles trying stuff, that’s the reason I was starting over. What would you suggest to use for a windows machine? And can I just uninstall each of the programs using the standard windows uninstall?
@nickrout Madness doesn’t begin to describe it, more like nightmare.
Thanks

10

There were 3 steps and I didn’t see any HIB or pcieport errors for the first 2. The 3rd step was for Apex and Gasket which I didn’t have an issue during install step 2. Are there other steps I’m not seeing?

11

The suggestion would be not trying to use a windows machine, the frigate docs suggest the same: Installation | Frigate

12

Thank you
That gives me the backup I needed for the wife. Buying a mini PC now.

1 Like