Please Help!

[fdrcti (federico)]

Good Morning guys,
I was setting up HA on a raspberry pi with a sonoff USB and zigbee2mqtt. It was working properly but suddenly all the philips hue bulb stopped to work.
The other zigbee devices are working properly.
I’ve tried to remove the bulb and it was possibile only through “force remove”.
It is then discovered properly but with a small danger red logo

If i Select the reload button

The red logo chans in a spinning logo
But it is stuck spinning now.
I have no idea how to fix it and I need to solve ASAP because all the light in my house are hue bulbs, is there anyone that can help?

[WallyR (Wally)]

Use MQTT-Explorer (http://mqtt-explorer.com/) to see what is happening on your MQTT broker.
This will make you understand what the devices are communicating to each other.

[fdrcti (federico)]

I’ve tried to instal through this:

[Deprecated]MQTT Explorer Addon

:exclamation:This version is no longer current. Please refer to Smegolworms4 release here Addon MQTT Explorer new Version [image] This addon served its purpose and was very useful for those who needed it about a year ago. However, the original author has posted an addon and will maintain from here on out. Please refer to Smegolworms4 post here Addon MQTT Explorer new Version MQTT Explorer Addon Get MQTT Explorer right inside Home Assistant, any time, no need to find the execut…

But it seems not working, is there any way to install?

EDIT: It seems there were problems to the repo i’ve installed only mqtt explorer and worked fine.

[fdrcti (federico)]

I managed to connect to mqtt explporer, what should I look for?

EDIT: Now I’ve removed all the bulbs and added once more. The firs one is working properly but keeps the red logo, the others are working properly. I really can not understand why and what does that red logo represent.

[WallyR (Wally)]

I have no idea what to look for in the MQTT, since I do not use my Hue bulbs through that and only have some fire alarms connected through it, but they require some debugging too.
You have to look at the messages there and see if something put out.
Also look at the logs in HA, but the general once and the once for Zigbee2MQTT.