Power cut, restore, no zigbee

Configuration Zigbee
,
1

I am very new to home assistant so please forgive my lack of knowledge.

I had a power cut and after the power restored the pi4 running home assistant with ssd didnt restore. The ethernet port would flash for a couple of seconds then turn off.

So I restored by installing fresh copy onto ssd and restored the backup file.

Every work well apart from the zigbee network, I have a sonoff dongle 3.0 plus.

All the devices are there with most of them showing as connected however if I try to turn a light on it shows it turning on but after a couple of seconds it show as off but the light never responds.

I have tried to reconnect a couple of devices but it doesn’t discover any device.

Any advice??

Screenshot_20211207-211327_Home Assistant
Screenshot_20211207-211327_Home Assistant1440×3200 213 KB

2

Hmm, I am not familiar with Sonoff. Have you tried reconnecting one of your devices just to make sure there isn’t anything (like the Sonoff dongle ) broken?

3

All sorted, done a complete shut down of everything, left it off for 15 mins, and its all restored!

1 Like
4

Great, thanks for sharing your solution. It helps others :+1: