Hi,
I have problem adding zwave devices.
Have a Fibaro switch2 relay with I try to add but I don’t geting it to be added.
I have tried the UI in Home Assistant and Ozwcp but the same result with the both of them, nothing happends.
Somebody else that have had that problem?
//Fredrik
Where is the switch in relation to the Home Assistant server and your Z-Wave stick, and to the nearest mains powered Z-Wave device?
It may well be out of range.
I place the switch next to the z-wave stick
What shows up in the OZW_Log.txt when you try to pair it?
I use the Ozwcp and try to add my fibaro switch2 as I put just beside the z-wave controller.
Start the add-function in ozwcp and then make three fast press on the B button on the fibaro switch2.
But the fibaro does not get added.
Ozw_log:
2019-06-27 20:42:58.319 Detail, Queuing (Controller) Add Device
2019-06-27 20:42:58.337 Info, Add Device
2019-06-27 20:42:58.337 Detail, contrlr, Queuing (Command) ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x4d, 0x3c
2019-06-27 20:42:58.337 Detail, Notification: ControllerCommand - Starting
2019-06-27 20:42:58.337 Info, Notification: ControllerCommand home e43994a6 Event 1 Error 0
2019-06-27 20:42:58.338 Detail,
2019-06-27 20:42:58.338 Info, contrlr, Sending (Command) message (Callback ID=0x4d, Expected Reply=0x4a) - ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x4d, 0x3c
2019-06-27 20:42:58.341 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x4d, 0x01, 0x00, 0x00, 0xfe
2019-06-27 20:42:58.341 Detail,
2019-06-27 20:42:58.341 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2019-06-27 20:42:58.341 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
2019-06-27 20:42:58.341 Detail, Node001, Expected callbackId was received
2019-06-27 20:42:58.341 Detail, Node001, Expected reply was received
2019-06-27 20:42:58.342 Detail, Node001, Message transaction complete
2019-06-27 20:42:58.342 Detail,
2019-06-27 20:42:58.342 Detail, contrlr, Removing current message
2019-06-27 20:42:58.342 Detail, Notification: ControllerCommand - Waiting
2019-06-27 20:42:58.342 Info, Notification: ControllerCommand home e43994a6 Event 4 Error 0
2019-06-27 20:42:58.342 Info, WriteNextMsg Controller nothing to do
The manual says:
Quickly, three times press the S1 switch.
Also try Add Secure Node
Actually I where trying to do a Secure Node Add!
I will try to do it again.
As I understand can you either press S1 three times of press B button three times.
Should be the same result, but I can try to press S1 instead of B button to see if it makes any different.
//Fredrik