Problem: Garage door controller missing controls

Chris0 · March 11, 2025, 1:17am

Hi

I’m new to Home Assistant. Have bought few Zigbee devices for testing and all work as expected
except one, garage door controller. OXT T250G, a “Tuya Intelligence inside” one.
It gets discovered as:
TS0603 by _TZE608_fmemczv1

There are no controls.

This controller is just a relais and a sensor which can report door’s state: closed/open.
So I would expect a control to operate the relais and something allowing me to read state
of the sensor.
I guess the “abilities” of this controller should get discovered automatically.
Am I wrong?

Thanks in advance for any help.

Regards,
Chris

Curtis_Healy · March 31, 2025, 4:05am

same issue here - can see people integrating the TS601 models with a ‘Quirk’ but doesnt seem to work for the TS603 model.

shecobon · April 2, 2025, 3:44am

For the TS0603 follow this:

but replace the python script with the one from the link below:

github.com/zigpy/zha-device-handlers

[Device Support Request] TS0603 by _TZE608_c75zqghm

opened 12:12PM - 18 Jul 24 UTC

G4LLY

Tuya device support request

### Problem description Hello, I get this garage door opener from Aliexpress …and once connected to ZHA, is does not show the proper command / informations. ### Solution description As a door opener it should have an open-close command and a sensor to show the door state (open / close) ### Screenshots/Video <details><summary>Screenshots/Video</summary> ![image](https://github.com/user-attachments/assets/51b5a8d0-2a9a-4fac-94ae-0ce4dbab62c6) </details> ### Device signature <details><summary>Device signature</summary> ```json { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)", "endpoints": { "1": { "profile_id": "0x0104", "device_type": "0x0051", "input_clusters": [ "0x0000", "0x0003", "0x0004", "0x0005", "0xef00" ], "output_clusters": [ "0x000a", "0x0019" ] }, "242": { "profile_id": "0xa1e0", "device_type": "0x0061", "input_clusters": [], "output_clusters": [ "0x0021" ] } }, "manufacturer": "_TZE608_c75zqghm", "model": "TS0603", "class": "zigpy.device.Device" } ``` </details> ### Diagnostic information <details><summary>Diagnostic information</summary> ```json { "home_assistant": { "installation_type": "Home Assistant OS", "version": "2024.7.2", "dev": false, "hassio": true, "virtualenv": false, "python_version": "3.12.4", "docker": true, "arch": "x86_64", "timezone": "Europe/Brussels", "os_name": "Linux", "os_version": "6.6.33-haos", "supervisor": "2024.06.2", "host_os": "Home Assistant OS 12.4", "docker_version": "26.1.4", "chassis": "vm", "run_as_root": true }, "custom_components": { "hacs": { "documentation": "https://hacs.xyz/docs/configuration/start", "version": "1.34.0", "requirements": [ "aiogithubapi>=22.10.1" ] }, "tapo": { "documentation": "https://github.com/petretiandrea/home-assistant-tapo-p100", "version": "3.1.2", "requirements": [ "plugp100==5.1.3" ] }, "easee": { "documentation": "https://github.com/nordicopen/easee_hass", "version": "0.9.59", "requirements": [ "pyeasee==0.8.1" ] }, "tapo_control": { "documentation": "https://github.com/JurajNyiri/HomeAssistant-Tapo-Control", "version": "5.4.26", "requirements": [ "pytapo==3.3.23" ] }, "aarlo": { "documentation": "https://github.com/twrecked/hass-aarlo/blob/master/README.md", "version": "0.8.1.4", "requirements": [ "unidecode", "pyaarlo>=0.8.0.7" ] } }, "integration_manifest": { "domain": "zha", "name": "Zigbee Home Automation", "after_dependencies": [ "onboarding", "usb" ], "codeowners": [ "dmulcahey", "adminiuga", "puddly", "TheJulianJES" ], "config_flow": true, "dependencies": [ "file_upload" ], "documentation": "https://www.home-assistant.io/integrations/zha", "iot_class": "local_polling", "loggers": [ "aiosqlite", "bellows", "crccheck", "pure_pcapy3", "zhaquirks", "zigpy", "zigpy_deconz", "zigpy_xbee", "zigpy_zigate", "zigpy_znp", "universal_silabs_flasher" ], "requirements": [ "bellows==0.39.1", "pyserial==3.5", "zha-quirks==0.0.117", "zigpy-deconz==0.23.2", "zigpy==0.64.1", "zigpy-xbee==0.20.1", "zigpy-zigate==0.12.1", "zigpy-znp==0.12.2", "universal-silabs-flasher==0.0.20", "pyserial-asyncio-fast==0.11" ], "usb": [ { "vid": "10C4", "pid": "EA60", "description": "*2652*", "known_devices": [ "slae.sh cc2652rb stick" ] }, { "vid": "10C4", "pid": "EA60", "description": "*slzb-07*", "known_devices": [ "smlight slzb-07" ] }, { "vid": "1A86", "pid": "55D4", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus v2" ] }, { "vid": "10C4", "pid": "EA60", "description": "*sonoff*plus*", "known_devices": [ "sonoff zigbee dongle plus" ] }, { "vid": "10C4", "pid": "EA60", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*tubeszb*", "known_devices": [ "TubesZB Coordinator" ] }, { "vid": "1A86", "pid": "7523", "description": "*zigstar*", "known_devices": [ "ZigStar Coordinators" ] }, { "vid": "1CF1", "pid": "0030", "description": "*conbee*", "known_devices": [ "Conbee II" ] }, { "vid": "0403", "pid": "6015", "description": "*conbee*", "known_devices": [ "Conbee III" ] }, { "vid": "10C4", "pid": "8A2A", "description": "*zigbee*", "known_devices": [ "Nortek HUSBZB-1" ] }, { "vid": "0403", "pid": "6015", "description": "*zigate*", "known_devices": [ "ZiGate+" ] }, { "vid": "10C4", "pid": "EA60", "description": "*zigate*", "known_devices": [ "ZiGate" ] }, { "vid": "10C4", "pid": "8B34", "description": "*bv 2010/10*", "known_devices": [ "Bitron Video AV2010/10" ] } ], "zeroconf": [ { "type": "_esphomelib._tcp.local.", "name": "tube*" }, { "type": "_zigate-zigbee-gateway._tcp.local.", "name": "*zigate*" }, { "type": "_zigstar_gw._tcp.local.", "name": "*zigstar*" }, { "type": "_uzg-01._tcp.local.", "name": "uzg-01*" }, { "type": "_slzb-06._tcp.local.", "name": "slzb-06*" }, { "type": "_xzg._tcp.local.", "name": "xzg*" }, { "type": "_czc._tcp.local.", "name": "czc*" } ], "is_built_in": true }, "setup_times": { "null": { "setup": 0.00010956400001305155 }, "01J2VYW0Q4CK22WV107ZBJ5FJZ": { "wait_import_platforms": -0.0002739289993769489, "config_entry_setup": 15.528421514998627 } }, "data": { "ieee": "**REDACTED**", "nwk": 10239, "manufacturer": "_TZE608_c75zqghm", "model": "TS0603", "name": "_TZE608_c75zqghm TS0603", "quirk_applied": false, "quirk_class": "zigpy.device.Device", "quirk_id": null, "manufacturer_code": 4417, "power_source": "Mains", "lqi": 255, "rssi": -36, "last_seen": "2024-07-18T14:08:40", "available": true, "device_type": "Router", "signature": { "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)", "endpoints": { "1": { "profile_id": "0x0104", "device_type": "0x0051", "input_clusters": [ "0x0000", "0x0003", "0x0004", "0x0005", "0xef00" ], "output_clusters": [ "0x000a", "0x0019" ] }, "242": { "profile_id": "0xa1e0", "device_type": "0x0061", "input_clusters": [], "output_clusters": [ "0x0021" ] } }, "manufacturer": "_TZE608_c75zqghm", "model": "TS0603" }, "active_coordinator": false, "entities": [ { "entity_id": "button.tze608_c75zqghm_ts0603_identifier", "name": "_TZE608_c75zqghm TS0603" }, { "entity_id": "update.tze608_c75zqghm_ts0603_micrologiciel", "name": "_TZE608_c75zqghm TS0603" } ], "neighbors": [], "routes": [], "endpoint_names": [ { "name": "SMART_PLUG" }, { "name": "PROXY_BASIC" } ], "user_given_name": null, "device_reg_id": "732c438dedfedfd781d9a2499c62b5ce", "area_id": "garden", "cluster_details": { "1": { "device_type": { "name": "SMART_PLUG", "id": 81 }, "profile_id": 260, "in_clusters": { "0x0000": { "endpoint_attribute": "basic", "attributes": { "0x0004": { "attribute_name": "manufacturer", "value": "_TZE608_c75zqghm" }, "0x0005": { "attribute_name": "model", "value": "TS0603" } }, "unsupported_attributes": {} }, "0x0003": { "endpoint_attribute": "identify", "attributes": {}, "unsupported_attributes": {} }, "0x0004": { "endpoint_attribute": "groups", "attributes": {}, "unsupported_attributes": {} }, "0x0005": { "endpoint_attribute": "scenes", "attributes": {}, "unsupported_attributes": {} }, "0xef00": { "endpoint_attribute": null, "attributes": {}, "unsupported_attributes": {} } }, "out_clusters": { "0x000a": { "endpoint_attribute": "time", "attributes": {}, "unsupported_attributes": {} }, "0x0019": { "endpoint_attribute": "ota", "attributes": { "0x0002": { "attribute_name": "current_file_version", "value": 64 } }, "unsupported_attributes": {} } } }, "242": { "device_type": { "name": "PROXY_BASIC", "id": 97 }, "profile_id": 41440, "in_clusters": {}, "out_clusters": { "0x0021": { "endpoint_attribute": "green_power", "attributes": {}, "unsupported_attributes": {} } } } } } } ``` </details> ### Logs <details><summary>Logs</summary> ```python [Paste the logs here] ``` </details> ### Custom quirk <details><summary>Custom quirk</summary> ```python """Tuya based cover and blinds.""" from typing import Dict from zigpy.profiles import zha from zigpy.quirks import CustomDevice import zigpy.types as t from zigpy.zcl.clusters.general import Basic, GreenPowerProxy, Groups, Identify, Ota, Scenes, Time from zigpy.zcl.clusters.security import IasZone from zhaquirks.const import ( DEVICE_TYPE, ENDPOINTS, INPUT_CLUSTERS, MODELS_INFO, OUTPUT_CLUSTERS, PROFILE_ID, ) from zhaquirks.tuya import TuyaLocalCluster from zhaquirks.tuya.mcu import ( DPToAttributeMapping, TuyaMCUCluster, TuyaOnOff, ) from zhaquirks.tuya.ts0601_dimmer import TuyaOnOffNM ZONE_TYPE = 0x0001 class ContactSwitchCluster(TuyaLocalCluster, IasZone): """Tuya ContactSwitch Sensor.""" _CONSTANT_ATTRIBUTES = {ZONE_TYPE: IasZone.ZoneType.Contact_Switch} def _update_attribute(self, attrid, value): self.debug("_update_attribute '%s': %s", attrid, value) super()._update_attribute(attrid, value) class TuyaGarageManufCluster(TuyaMCUCluster): """Tuya garage door opener.""" attributes = TuyaMCUCluster.attributes.copy() attributes.update( { # ramdom attribute IDs 0xEF02: ("dp_2", t.uint32_t, True), 0xEF04: ("dp_4", t.uint32_t, True), 0xEF05: ("dp_5", t.uint32_t, True), 0xEF0B: ("dp_11", t.Bool, True), 0xEF0C: ("dp_12", t.enum8, True), } ) dp_to_attribute: Dict[int, DPToAttributeMapping] = { # garage door trigger ¿on movement, on open, on closed? 1: DPToAttributeMapping( TuyaOnOffNM.ep_attribute, "on_off", ), 2: DPToAttributeMapping( TuyaMCUCluster.ep_attribute, "dp_2", ), 3: DPToAttributeMapping( ContactSwitchCluster.ep_attribute, "zone_status", converter=lambda x: IasZone.ZoneStatus.Alarm_1 if x else 0, endpoint_id=2, ), 4: DPToAttributeMapping( TuyaMCUCluster.ep_attribute, "dp_4", ), 5: DPToAttributeMapping( TuyaMCUCluster.ep_attribute, "dp_5", ), 11: DPToAttributeMapping( TuyaMCUCluster.ep_attribute, "dp_11", ), # garage door status (open, closed, ...) 12: DPToAttributeMapping( TuyaMCUCluster.ep_attribute, "dp_12", ), } data_point_handlers = { 1: "_dp_2_attr_update", 2: "_dp_2_attr_update", 3: "_dp_2_attr_update", 4: "_dp_2_attr_update", 5: "_dp_2_attr_update", 11: "_dp_2_attr_update", 12: "_dp_2_attr_update", } class TuyaGarageSwitchTO(CustomDevice): """Tuya Garage switch.""" signature = { MODELS_INFO: [ ("_TZE608_c75zqghm", "TS0603"), ], ENDPOINTS: { # <SimpleDescriptor endpoint=1 profile=260 device_type=0x0051 # input_clusters=[0, 4, 5, 61184] # output_clusters=[10, 25]> 1: { PROFILE_ID: zha.PROFILE_ID, DEVICE_TYPE: zha.DeviceType.SMART_PLUG, INPUT_CLUSTERS: [ Basic.cluster_id, Identify.cluster_id, Groups.cluster_id, Scenes.cluster_id, TuyaGarageManufCluster.cluster_id, ], OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id], }, # <SimpleDescriptor endpoint=242 profile=41440 device_type=97 # input_clusters=[] # output_clusters=[33] 242: { PROFILE_ID: 41440, DEVICE_TYPE: 97, INPUT_CLUSTERS: [], OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id], }, }, } replacement = { ENDPOINTS: { 1: { DEVICE_TYPE: zha.DeviceType.SMART_PLUG, INPUT_CLUSTERS: [ Basic.cluster_id, Groups.cluster_id, Scenes.cluster_id, TuyaGarageManufCluster, TuyaOnOffNM, ], OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id], }, 2: { PROFILE_ID: zha.PROFILE_ID, DEVICE_TYPE: zha.DeviceType.IAS_ZONE, INPUT_CLUSTERS: [ ContactSwitchCluster ], OUTPUT_CLUSTERS: [], }, 242: { PROFILE_ID: 0xA1E0, DEVICE_TYPE: 0x0061, INPUT_CLUSTERS: [], OUTPUT_CLUSTERS: [0x0021], }, }, } ``` </details> ### Additional information I'm new to HA and Zigbee, still on the learning path, any help is welcom :) link to the device: https://fr.aliexpress.com/item/1005007082676496.html?spm=a2g0o.order_list.order_list_main.17.2a035e5bCYzg5r&gatewayAdapt=glo2fra

milti · May 30, 2025, 9:51am

Hi there, am wondering if someone could help me. I’m new to HA and trying to get my Tuya garage door device working. Seem to be missing something fundamental, just don’t know what. Here are some pics of where I’m at.

Any help would be awesome. Thanks in advance.

milti · May 30, 2025, 9:56am

Sorry, here is another pic to assist: