Greetings!
I’m new at HA and I’m trying to use my old DSC-825L camera. I’m trying to configure recording like shell-command. I have HassOS 4.17
I’m using that command to record an small video for an automatism:
shell_command:
'timeout 30s /usr/bin/ffmpeg -rtsp_transport tcp -i rtsp://ipcam/video/mjpg.cgi -ss 00:00:0.0 -t 10 -an /config/capturas/dormitorio.mp4 -y'
And I have this error from terminal:
"timeout: can’t execute /usr/bin/ffmpeg: no such file or directory
I have that in configuration.yaml:
camera:
- platform: mjpeg
name: dormitorio
still_image_url: http://ipcam/image/jpeg.cgi
mjpeg_url: http://ipcam/video/mjpg.cgi
username: admin
password: Papirruni20
authentication: basic
binary_sensor:
- platform: ffmpeg_motion
name: movimiento_dormitorio
input: -rtsp_transport tcp -i rtsp://ipcam/video/mjpg.cgi
changes: 10
reset: 1
- platform: ffmpeg_noise
name: ruido_dormitorio
input: -rtsp_transport udp -i rtsp://ipcam/eng/admin/adv_audio_detection.cgi
ffmpeg:
ffmpeg_bin: /config/bin/ffmpeg
shell_command:
video_dormitorio: 'timeout 30s /usr/bin/ffmpeg -rtsp_transport tcp -i rtsp://ipcam/video/mjpg.cgi -ss 00:00:0.0 -t 10 -an /config/capturas/dormitorio.mp4 -y'
foto_dormitorio: 'timeout 5s /usr/bin/wget --output-document=/config/capturas/dormitorio.jpg ipcam/image/jpeg.cgi?profileid=3'
Note that snapshot works…
Thanks a lot.