Problems with Homematic CCU2 integration

Configuration
1

Hi
i’m new to home assistant, coming from Openhab. actually i try to install the homematic add-on. i’m using a CCU2. In the Log i get some entries but i can not find the reason for it.

Setup of homematic is taking over 10 seconds.
16:08 __main__.py (WARNING)
Failed to initialize proxy
16:08 components/homematic/__init__.py (WARNING)

2019-10-04 13:09:25 WARNING (SyncWorker_13) [pyhomematic._hm] Failed to initialize proxy
2019-10-04 13:09:35 WARNING (MainThread) [homeassistant.setup] Setup of homematic is taking over 10 seconds.
2019-10-04 13:09:37 WARNING (SyncWorker_8) [pyhomematic.devicetypes.generic] HMGeneric.getValue: BRIGHTNESS on OEQ0755176:1 Exception: <Fault -1: 'Failure'>
2019-10-04 13:09:38 WARNING (SyncWorker_5) [pyhomematic.devicetypes.generic] HMGeneric.getValue: WORKING on LEQ0076491:1 Exception: <Fault -1: 'Failure'>
2019-10-04 13:09:39 WARNING (SyncWorker_6) [pyhomematic.devicetypes.generic] HMGeneric.getValue: WORKING on LEQ0234310:1 Exception: <Fault -1: 'Failure'>
2019-10-04 13:09:42 WARNING (SyncWorker_6) [pyhomematic.devicetypes.generic] HMGeneric.getValue: STATE on LEQ0234310:1 Exception: <Fault -1: 'Failure'>
2019-10-04 13:09:46 WARNING (MainThread) [homeassistant.components.climate] Setup of platform homematic is taking over 10 seconds.
2019-10-04 13:09:46 WARNING (MainThread) [homeassistant.components.switch] Setup of platform homematic is taking over 10 seconds.
2019-10-04 13:09:46 WARNING (MainThread) [homeassistant.components.cover] Setup of platform homematic is taking over 10 seconds.
2019-10-04 15:09:38 ERROR (MainThread) [homeassistant.components.hassio] Component error: data - Integration data not found.
Component error: service - Integration service not found.

my configuration.yaml

homematic:
  hosts:
    ccu2:
      host: 192.168.1.14
      username: Admin
  interfaces:
    rf:
      host: 192.168.1.14
      resolvenames: json
      username: Admin
    wired:
      host: 192.168.1.14
      port: 2000
      resolvenames: json
      username: Admin
    ip:
      host: 192.168.1.14
      port: 2010
    groups:
      host: 192.168.1.14
      port: 9292
      resolvenames: json
      username: Admin
      path: /groups

who can help me where i have to look to fix it??

2

Hey, i have the same problem with my CCU3!

All homematic devices works fine in my setup, but the only homematic ip device i have doesn’t work! i think thats the problem.

But i don’t know exactly what should i do to fix this :smiley:

3

If you don’t solve your problem until yet you could try to add resolvenames, username and password to the sections you need.

4

As stated in this thread I have problems with Homematic IP devices too. They were working without a problem for months.
I am not sure if the problem started with the 0.100 versions of Home Assistant or an update to RaspberryMatic (which uses the same source code as used in the original CCUs).

5

after few reboots and a system update it is now runing.
what i don t understand is why the homematic devices doesn t show up in the device list