QS-WIFI-D02-TRIAC Tuya Dimmer

Hi, I bought this dimmer and managed to flash it with a Tasmota, however I have tried everything and cann’t set it up on Tasmota. Can some one help me please.

17:29:27 TYA: Send “55aa00000000ff”
17:29:38 TYA: Send “55aa00000000ff”
17:29:42 WIF: Checking connection…
17:29:42 WIF: Connected
17:29:49 TYA: Send “55aa00000000ff”
17:30:00 TYA: Send “55aa00000000ff”
17:30:02 WIF: Checking connection…
17:30:02 WIF: Connected
17:30:11 TYA: Send “55aa00000000ff”
17:30:22 WIF: Checking connection…
17:30:22 WIF: Connected
17:30:22 TYA: Send “55aa00000000ff”
17:30:33 TYA: Send “55aa00000000ff”
17:30:42 WIF: Checking connection…
17:30:42 WIF: Connected
17:30:44 TYA: Send “55aa00000000ff”
17:30:55 TYA: Send “55aa00000000ff”
17:31:02 WIF: Checking connection…
17:31:02 WIF: Connected

I bought it from Ebay:

Hello, i got it to work by following this guide, https://templates.blakadder.com/qs-wifi_D01_dimmer.html

Thanks, but I already tried following this guide with no luck.

And you have flashed the device with tasmota-scripting.bin and added the script in the configuration?

Hmm nop, may bad. Do you know how I can re-flash it with tasmota-scripting.bin over the air?

Hi guys! I also bought two QS-WIFI-D02 dimmers. Both have an LM1 chip, but different boards … I flashed one with the help of Tasmotizer. But unfortunately there is no drawing in the description of how the two switches and lights are to be connected and I also do not know which GPIO are responsible for counter and PWM. Does anyone have a working template? Many Thanks!

Hello, do you have found any solutions on that ???