Reset energy counter (kWh counter)

Hardware
1

Hello,

I would reset the energy counter of my devices :

I have 2 devices:

image
image346×700 26.6 KB

image
image339×775 26.5 KB

As you can see, the “energy” counter is not null, do you have a tip to reset it please ?

Thanks !

2

:arrow_up: :smiley:

3

I rested it with mathematical operation, but if you have a better solution, i’m interrested :wink:

4

I too am looking for a way to reset the accumulated kwh reading on a Zigbee device. Other than removing the device and adding it again.

image

5

Sorry @nappyjim
2 years after, I still haven’t found the way to reset this counter :laughing:

1 Like
6

also interested how to do this, for an zwave energy plug

7

seems not much follow up discussion on this thread.

I also have similar needs. I have 4 Eve Energy meters , added on different dates. I would like to see how I can reset all kWh accumalated readings say from 1st day of next month so that I can compare apple to apple for all 4 energy meters.

I guess there is one crude way… remove them all and add them back at the same time?

8

Hi @fuzzygel,

It’s easy to do that with Grafana for example.
Your data will do:
HomeAssistant → InfluxDB → Grafana

And in Grafana you can do this:

image
image2561×755 111 KB

The tips is to do difference on the calculation

9

thank you so much, I am not familiar with InfluxDB or Grafana, Let me explore and I might (most likely ) need to come back with more questions :sweat_smile:

thanks in advance