Xoxe
(Jose)
October 4, 2024, 2:39pm
1
I have the Samba NAS addon installed and it works perfectly, I can see everything that is shared on my internal network. Do you know if there is any way to see the capacity of the hard drives? I can’t see how.
BebeMischa
(Bebe Mischa)
October 4, 2024, 2:46pm
2
what kind of NAS do you use?
Xoxe
(Jose)
October 4, 2024, 2:48pm
3
It’s not a NAS, it’s a Mini PC with home Assistant OS and Samba NAS addon .
BebeMischa
(Bebe Mischa)
October 4, 2024, 3:01pm
4
from what i see in the docs, i understand, that it can send some info over MQTT.
But I don’t see, what exactly…
# Home Assistant Add-on: Samba NAS share
## ![#f03c15](https://via.placeholder.com/15/f03c15/f03c15.png) Important Note ![#f03c15](https://via.placeholder.com/15/f03c15/f03c15.png)
This addon has been designed, built and tested to work with HAOS (Homeassistant Operating System). The use in other types of installations is not recommended and useless as other solutions given by the host can be used.
### Using it on a different operating system leads to the error at startup. I apologize to all the advanced users who are using it on different OSes but I manage the addon in my spare time and instead of doing something useful lately I'm only replying to people who don't read the documentation. "This is the meaning of life"
## Installation
Follow these steps to get the add-on installed on your system:
1. Navigate in your Home Assistant frontend to **Supervisor** -> **Add-on Store**.
2. Find the "Samba NAS share" add-on and click it.
3. Click on the "INSTALL" button.
## How to use
1. In the configuration section, set a username and password.
2. Save the configuration.
This file has been truncated. show original
Xoxe
(Jose)
October 4, 2024, 3:31pm
5
Bffff but i haven’t installed MQTT, only for the info o need it’s too much