Schlage Smart Lock BE469ZP

Configuration Z-Wave
1

Hello Everyone - I have a bit of an odd issue. I recently cleaned up my install of Home Assistant, and repaired my locks using Z-Wave JS UI and have them set up using Keymaster. I have 4 of these locks in my home, and only one seems to have an odd issue.

On one of the locks, the touchscreen is disabled. I was digging around Z-Wave JS UI to see if there was a configuration bit I could flip, or compare it to a working lock and see if there was something different. After doing that and a few google searches, I have come up empty.

Does anyone know how I would re-enable the touchscreen on this lock?

2

Sounds like Vacation Mode is on for that lock. On my 469s (non ZP) that’s Param4. 0x00 (0) is disabled 0xFF (255) is enabled.

EDIT: Also accessible by programming code: [Schlage button] - Programming code - 4 - [check button]

3

Thanks Nathan! That was it. It was showing vacation mode disabled - ended up just toggling the setting and that did it. Just an odd glitch in the system I guess.

Thanks for the help!

1 Like