Sensors stopped to work? even are visible in Map

[phier (john)]

hi,
no idea what happened but for few sensors (motion ones) i cant change their config… .still getting error as

Publish ‘get’ ‘motion_sensitivity’ to ‘motion-sensor-xxx’ failed: ‘Error: Read 0x54ef44100043e436/1 aqaraOpple([268], {“sendWhen”:“immediate”,“timeout”:10000,“disableResponse”:false,“disableRecovery”:false,“disableDefaultResponse”:true,“direction”:0,“srcEndpoint”:null,“reservedBits”:0,“manufacturerCode”:4447,“transactionSequenceNumber”:null,“writeUndiv”:false}) failed (Timeout - 47401 - 1 - 21 - 64704 - 1 after 10000ms)’

also
Publish ‘set’ ‘motion_sensitivity’ to ‘motion-sensor-xxx’ failed: ‘Error: Write 0x54ef44100043e20b/1 aqaraOpple({“268”:{“value”:3,“type”:32}}, {“sendWhen”:“immediate”,“timeout”:10000,“disableResponse”:false,“disableRecovery”:false,“disableDefaultResponse”:true,“direction”:0,“srcEndpoint”:null,“reservedBits”:0,“manufacturerCode”:4447,“transactionSequenceNumber”:null,“writeUndiv”:false}) failed (Timeout - 50194 - 1 - 40 - 64704 - 4 after 10000ms)’

plus that sensor is reporting completely nonsense even the room is black
illuminance

Measured illuminance in lux

65533 lx

sensors are reacting … but just cant change their settings ;/

any idea? thanks

[phier (john)]

i removed one zigbee power plug where these sensors were connected… but even to reconnect to other plugs / routers… i completely lost signal with these motion sensors… i dont get it at all.

also sensors are few meters away from router/coordinator and signal is constantly dropping ?