Shelly dimmer 2 turning off after 30-40 seconds

Hardware
1

Flashed with tasmota, set template, then flashed stm32 firmware. Followed directions here. Can turn it on and adjust brightness in tasmota. Then it just turns off after 30-40 seconds by itself.

Installed 2 of these today and they are both doing the same thing, any idea what’s going on here?

Thanks all.

22:55:18.479 MQT: stat/basement-lights/RESULT = {"POWER":"ON"}
22:55:18.482 MQT: stat/basement-lights/POWER = ON
22:55:55.393 MQT: stat/basement-lights/RESULT = {"POWER":"OFF"}
22:55:55.397 MQT: stat/basement-lights/POWER = OFF
2

Cranked up web logging to max and found that it was overheating and shutting off. Set shdleadingedge 1 and no more overheating. Hopefully this helps others.

1 Like