Hi guys, I’m fairly new with HA and, I’m trying to see how HA can help me to automate and monitor some devices in my home. One issue or question that I have, is with a Shelly device (plus 1pm), that I’m using to monitor power usage on my HeatPump. I’ve added it in HA via Shelly integration, which …

Did you get an answer for this? Got a new Shelly Plus 1pm and indeed; refresh time is very different to my other Shelly’s. My 1pm (not plus) refreshed every 15s and so does the a 3EM.

Hello, I just experienced the same issue. I solved it by defining an additional REST sensor in yaml that polls the local Shelly Gen 2 Device API every second: rest: - resource: "http://<local ip of your shelly>/rpc/Switch.GetStatus?id=0" scan_interval: 1 timeout: 1 sensor: - na…

Thanks for that, works like it should.

thanks a lot also from my side… here you can see the good result [image] Shelly Plus 1PM not updating properly since firmware 1.4.2 Configuration Ciao, seems I’ve same problem here, Shelly plus 1PM power is not refreshing both on cloud and Home Assistant: it is refreshin…

I just noticed the same issue with Shelly Plus Plug S’s and PM Mini gen3’s after updating these from 1.4.2 to 1.4.4. Is there any way to use your solution to update the existing sensors (instead of creating new ones) so that I do not have to recreate the sankey chart that tracks power consumption o…

You could rename the sensor entities of the Shelly integration and then define the rest sensor names to match the original names used in your chart.

Hmm, that’s an idea :slight_smile: Also: " I used force_update to test if it works and disabled it to prevent unchanged values being written to the database." So unchanged values are not written by default? I was already thinking of adding an if-statement to only process new values if they are no…

Not sure if this will do it but have you setup and enabled RPC? Arcticle here: Shelly - Home Assistant

Tuxinator94 Uhm, I didn’t have to, Home Assistant picked the devices up without problems and gets values, just suddenly a whole lot less often since a firmware update.

I suggested it to see if the data updates for frequently using RPC protocol.

Shelly Plus 1 PM power refresh interval

Configuration

sisco1983 (Francesco Campagnolo) January 31, 2025, 9:37am 5

thanks a lot also from my side…

here you can see the good result