Thank you very much for sharing that 
Especially the Tasker config, I have bought it and I need to study it a bit
Regarding the proximity I can see you’re doing exactly as me, but isn’t 50km tolerance a little too high? 
I did put in meters with 25 of tolerance
Cheers!
Andrea
I think the tolerance value is in meters.
tolerance
(integer)(Optional)The tolerance used to calculate the direction of travel in meters (m) to filter out small GPS coordinate changes.
The unit_of_measurement i think is only for the reported state.
Oh okay
Make more sense like this
Also for the presence you use tasker?
No, i use 3 diffrent components for presence.
“Gps” = Google Maps Location Sharing (HA Component)
“Bluetooth” = https://github.com/andrewjfreyer/monitor (Project running on separate Pi)
“Wifi” = IFTTT Webhooks for my FINGBox (FingBox and IFTTT (Official Support))
And right now im testing out the hassio addon “A Better Presence” from here https://github.com/helto4real/hassio-add-ons/tree/master/presence to tie them all together.
I have used tasker for presence, sending gps, battery, and lots of data earlier, but it was quite battery draining back then.
Nowdays with webhooks i guess it would be a lot easier to setup in tasker, but right now i think these 3 is working good enough for me.
I see,
I am using namp ping and life360 but I am not having valid results.
Also I am not using Hass.io but Home Assistant so I cannot use/test that plugin unfortunately.
That’s annoying 
Anyway, thanks for the info!
If you have a spare Raspberry Pi (even pi zero) you should really look into the “Monitor” project i use.
it works really fine and have improve my presence by far.
I guess I need to fix my Wifi/Bluetooth on my Pi3 first because for some reason isnt working anymore )
Thanks for that
nice!
what the size for the main pictures? I tried it but my images get blown up…
also, i have this template to use for my location in my Tiles setup, could this be used in your card too?:
background-image: url(\"/local/tiles/family/marijn_' + entities['sensor.marijn_location_picture'].state + '.png\")
thanks!
thanks!
so this is the frame with the holes, and your home image in 1 file? Or are these in fact 2 files, a fram, and a bigger home_image.
Would love to have this frame file 
I’ll share it when i come home to by desktop computer.
It’s a .psd file
– EDIT –
Here is the link to my .psd file:
– EDIT –
hey sorry for delay this is what i use im still on 0.78 as lovelace changed a bit and havent got round to updating hope it helps
- type: vertical-stack
cards:
- type: glance
title:
column_width: calc(100% / 3)
show_name: false
show_state: false
entities:
- entity: input_boolean.switch_tv_ir_num_1
tap_action:
action: toggle
icon: mdi:numeric-1-box
- entity: input_boolean.switch_tv_ir_num_2
tap_action:
action: toggle
icon: mdi:numeric-2-box
- entity: input_boolean.switch_tv_ir_num_3
tap_action:
action: toggle
icon: mdi:numeric-3-box
- entity: input_boolean.switch_tv_ir_num_4
tap_action:
action: toggle
icon: mdi:numeric-4-box
- entity: input_boolean.switch_tv_ir_num_5
tap_action:
action: toggle
icon: mdi:numeric-5-box
- entity: input_boolean.switch_tv_ir_num_6
tap_action:
action: toggle
icon: mdi:numeric-6-box
- entity: input_boolean.switch_tv_ir_num_7
tap_action:
action: toggle
icon: mdi:numeric-7-box
- entity: input_boolean.switch_tv_ir_num_8
tap_action:
action: toggle
icon: mdi:numeric-8-box
- entity: input_boolean.switch_tv_ir_num_9
tap_action:
action: toggle
icon: mdi:numeric-9-box
- entity: input_boolean.switch_tv_ir_num_0
tap_action:
action: toggle
icon: /local/
- entity: input_boolean.switch_tv_ir_num_0
tap_action:
action: toggle
icon: mdi:numeric-0-box
- entity: switch.remote_ir_number_0
tap_action:
action: toggle
icon: /local/
- entity: switch.remote_ir_number_0
tap_action:
action: toggle
icon: /local/
- entity: switch.remote_ir_number_0
tap_action:
action: toggle
icon: /local/
- entity: switch.remote_ir_number_0
tap_action:
action: toggle
icon: /local/sorry missed this before, thanks for sharing!
Hi!
I’m trying to making a tab for my vacuum cleaner using picture elements, but I want it to fit the screen and get rid of the scrollbar.
I can accomplish this if I set the picture as background but then I lose all the benefits of picture elements.
Any ideas?
Background:
- title: Roborock
background: center / cover no-repeat url("/local/xiaomi_vacuum.jpg") fixed
Picture elements:
- title: Roborock
panel: true
cards:
- type: picture-elements
image: /local/xiaomi_vacuum.jpg
etc...
Hi
Can someone please tell me how they use the picture element. How do you create the ui-Lovelace.yaml? I tried many things but nothing works.
Running Hassio 89.2
Thanks.
Jim, a bit off topic - do you use your Mi Flora outside? If so, any issues?
Yes I have about 15 of them outside for over a year and they are all still going. We just had 150mm of rain over the weekend and they are all still working. They have also survived an Australian summer which is the ultimate litmus test lol. Only thing is I had to put a pi zero outside to connect to them as Bluetooth range is limited.
