SNMP sensor mib custom

hi to all, i need use SNMP for read a power meter on my ilo4, with mib browser i load CPQHLTH-MIB and can see data with oid .1.3.6.1.4.1.232.6.2.15.3 (if I don’t upload the mibs to those addresses I don’t see anything).

now its possible load a mib file into ha?

A mib file only translate the numbers to human readable text.
I should work without, so you must be doing something wrong.
Have you tried a mib browser to do a tree walk?

this the mib browser whith load cpqhlth

and this without load cpqhlth and snmp v1

v2c without load cpqhlth

That must be the MIB browser that is at fault then.
Try the MIB browser from iReasoning.
Free MIB Browser / MIB Browser / SNMP Browser. (ireasoning.com)

It also have the option to do a tree walk by choosing the operation in the upper right corner.

the final 0 was missing, with the software you suggested it put it on its own