Hello,
I would like to buy wired somfy motors with wired wall switches. All wired directly to a esp32.
Is there a yaml for esphome to integrate them? Comparable to the rts integration from rtshouse?
Will there be a feedback of inclination and hight? If so, is that done with time counting?
Do you have a proposal for a somfy motor? I guess any 4 wire motor would be ok?
Many thanks in advance
Mikefila
May 8, 2024, 4:44pm
2
It sound like you would need a relay to act as the wall switch. There are prebuilt relays like sonoff or shelly that would be able to control the motor.
Relays to command the motor will be in my main cabinet.
Does it exist a Esphome integration to control inclination and hight kind of this one? :
I have created a Somfy RTS integration that uses an ESP32 and a CC1101 transceiver that is readily available. The radio range is excellent, it supports up to 32 covers per device, and it links your existing Somfy remotes to keep the shade positions and tilt in sync, and it supports the My positions set from your remotes.
The configuration is simple, it requires no coding, and you can update the device OTA so stuff it somewhere and get control of your shades, drapes, and blinds.
[image]
The c…
rstrouse
May 10, 2024, 6:03am
4
ESPSomfy RTS also controls motors with relays connected to GPIO.
1 Like
