Hi Everyone
Every time I reboot my HA server, my Zigbee sensors become “Unavailable”. Sometimes I need to open and close the door, for example, and it starts to show the state, and sometimes I need to delete the device from HA and add it again.
I don’t know how to debug what is happening. An article or idea I could follow to find out the issue?
Is my firmware Updated ?
Thank you so so so much !
Marcelo
Generic Zigbee Coordinator (EZSP)
Firmware: 6.7.8.0 build 373
Zigbee info
Device Type: Coordinator
LQI: 255
RSSI: Unknown
Sonoff ZHABridge
Tasmota
|Program Version|14.3.0.4 (5aaeecd-zbbridge)|
|Build Date & Time|2024-11-03T09:41:59|
|Core/SDK Version|2_7_8/2.2.2-dev(38a443e)|
|Uptime|0T00:22:02|
|Flash Write Count|2794 at 0x1FB000|
|Boot Count|251|
|Restart Reason|Software/System restart|
|—|
|AP1 Information| SSId xxxxxx
RSSI 100%, -50 dBm
Mode 11n
Channel 1
BSSId xxxx
|—|
|Hostname|tasmota-AAA090-0144|
|MAC Address|xxxxxxxxxxxxx|
|IP Address (WiFi)|192.168.0.26|
|Gateway|192.168.0.1|
|Subnet Mask|255.255.0.0|
|DNS Server1|192.168.0.1|
|DNS Server2|0.0.0.0|
|—|
|HTTP API|Enabled|
|—|
|MQTT Host||
|MQTT Port|1883|
|MQTT TLS|Disabled|
|MQTT User|DVES_USER|
|MQTT Client|DVES_AAA090|
|MQTT Topic|tasmota_%06X|
|MQTT Group Topic 1|cmnd/tasmotas/|
|MQTT Full Topic|cmnd/tasmota_AAA090/|
|MQTT Fallback Topic|cmnd/DVES_AAA090_fb/|
|MQTT No Retain|Disabled|
|—|
|Emulation|None|
|—|
|ESP Chip Id|11182224 (ESP8266EX)|
|Flash Chip Id|0x1540A1 (DOUT)|
|Flash Size|2048 KB|
|Program Flash Size|2048 KB|
|Program Size|746 KB|
|Free Program Space|1044 KB|
|Free Memory|23.9 KB|
|—|
|File System Size|236 KB|
Thank you