Sonoff Zigbee 3.0 USB Dongle Plus E Router Parameters

Hardware
1

Hi,

I installed a Sonoff Zigbee 3.0 USB Dongle Plus E as Router following this guide.
Now I get those parameters in Home Assistant and I do not know what they mean:

  • Light (Off/On, default: Off, icon is yellow at 20% when On)
  • Light (Off/On, default: Off, icon is red at 20% when On)
  • Start-up behavior (Off/On/Toggle/PreviousValue, default: PreviousValue)
  • Start-up behavior (Off/On/Toggle/PreviousValue, default: PreviousValue)
  • Start-up color temperature (153-65279, default: 17476)
  • Start-up current level (0-255, default: 51)
  • Start-up current level (0-255, default: 51)
    image
    image395×906 37.2 KB

Does anyone know what those parameters are for?

Thanks

2

The lights are probably the leds, the rest I don’t know.

3

I suggest going with the obvious.
Is it working?
Defaults must be ok.
Is there something that’s not working?
See if one of those parameters apply thru research.

4

Hello,
I’ve the same situation, did you change the parameters of routers?
I’ve the same.
Seems that my repeater doesn’t associate any device.

thank you