I actually use the exact same setup for a long time - just never thought about pushing it to HA in addition to only send some local notification messages. Usually HA has some delay of sometimes few minutes so I didnât have an actual need for this shortcut adaption. But it doesnât harm so thx
this is almost instantaneous for me⊠maybe you have some delay due to other issues?
Whis a second automation rule i can keep it charged between 80-100% if iâm away for long time.
Anyway no battery drain and no need to check notifications on my phone.
Home that helps
how in the hole of holy mother jezus can i make this work for my laptop battery? i got home assistant installed somehow, got my tapo switch to finaly show up in home assistant devices list but canât get home assistant to actually do the command I set. I have bluestacks running as well with home assistant mobile app so that is how i figured i would trick it to think my laptop is the phone but no dice. nothing happens at any battery level. would really appreciate some help
can you see the laptop battery changing during use (discharging)?
not in bluestacks no. im not sure in home assistant wherei could see that if you meant it in that invironment
you should install home assistant companion app on your laptop⊠not bluestack
how do i do that without bluestacks? the home assistant companion appâŠis anâŠapp. runs on android or ios. my laptop runs windows 8. i donât get it. [not trying to be a wiseass]
Oh windows⊠I donât think they released a windows companion app. So no battery or other sensors are generated.
Read more here WTH is there no Home Assistant app for Windows - #8 by nickrout
Very cool project!
Right, got everything installed from IoT Link to MQTT and Tapo smart plug integrated with HACS. I can see the discharge level of the battery. But when i run this automation it still only works SOMETIMES after which it just wonât anymore. I donât know what Iâm doing wrong. I have it set to start charge at 64% and stop at 85%âŠbut then sometimes it starts at 64% but doesnât stop at 85%.
running win 8.1 if that matters, not win 10
the blueprint of @vorion ( Turn off phone charging after the phone is charged helped sort out the problem where the turning off switch wasnât working at the set battery level; basically I am running both blueprints now i use raazvanâs blueprint which works for starting up the switch at certain battery discharge level and then voironâs will shut it down at certain charged level.
Worked for a couple days but now MQTT broker can not read battery level anymore, just reads âunknownâ. I donât understand, nothing has been changed yet it no longer works even though it did earlier. Configuration file, login, IP address all the same as before.
Hello, for my part it does not work. At least not completely, I donât know what prevents the command from working properly, but when my smartphone discharges at the given percentage, my plug turns on well, but when it charges and reaches the given percentage or exceeds it, my plug does not turn off⊠Does anyone have an idea?
Hello
Doesnât work at all
Shame !
Bonjour Ă tous
jâai mis en place lâactivation du chargement de ma tablette murale et lâarrĂȘt automatique via le blueprint ci dessous mon alimentation est gĂ©rĂ© par un boitier sonoff
voila les détails de ma configuration blueprint
voilĂ celle de la carte
et volĂ lâhistorique du chargement et arrĂȘt de la tablette
jâespĂšre que cela pourra aider certains dâentres vous.
English please.
hello
I do not speak English.
Google is your friend
do as I use it.
translated by google translate
The rules are English only. I donât make the rules.
Hello Nicku,
ok I understand my Chrome is in automatic translation thatâs why I didnât pay attention.