Hey guys, I have a K10+ as well, and I have got it Matter enabled by updating my Hub2 firmware to v2.0-1.2. The tricky part is this firmware is not officially pushed to users, you need to send an email to Switchbot Support to get your account pushed with this update.
While It’s added basically just as a power outlet toggle, it’s still good to add it to HA as I can integrate it with some automation, like just turn on while I’m not at home.
Hope there are some better robot vaccum integrations comeout in future.
As an update, I got the S10 working via Matter after I got the SwitchBot Hub 2 connected to HA. That being said, it was brought in as an on/off switch with no vacuum controls so you are limited to starting or stopping a predefined job and that’s it. There are no other controls or feedback.
I already linked my K10+ and S10 via Matter as on/off devices; you need the HUB2 for that with firmware v1.2-2.0.
As an alternative, you also could create IFFT webhooks to trigger start, stop and pause vacuuming and use them with a hassio script. For my S10 aka Rosi I used rosi_clean as web request to start vacuuming.
