Sure, here it is:
[
"binary_sensor.bambup1s_recording_timelapse",
"binary_sensor.bambup1s_hms_errors",
"binary_sensor.bambup1s_online",
"binary_sensor.bambup1s_firmware_update",
"button.bambup1s_pause_printing",
"button.bambup1s_resume_printing",
"button.bambup1s_stop_printing",
"button.bambup1s_force_refresh_data",
"fan.bambup1s_cooling_fan",
"fan.bambup1s_aux_fan",
"fan.bambup1s_chamber_fan",
"image.bambup1s_camera",
"light.bambup1s_chamber_light",
"select.bambup1s_printing_speed",
"sensor.p1s_01p00a3b2900474_externalspool_external_spool",
"sensor.bambup1s_mqtt_connection_mode",
"sensor.bambup1s_wi_fi_signal",
"sensor.bambup1s_bed_temperature",
"sensor.bambup1s_target_bed_temperature",
"sensor.bambup1s_nozzle_target_temperature",
"sensor.bambup1s_nozzle_temperature",
"sensor.bambup1s_aux_fan_speed",
"sensor.bambup1s_chamber_fan_speed",
"sensor.bambup1s_cooling_fan_speed",
"sensor.bambup1s_heatbreak_fan_speed",
"sensor.bambup1s_speed_profile",
"sensor.bambup1s_current_stage",
"sensor.bambup1s_print_progress",
"sensor.bambup1s_print_status",
"sensor.bambup1s_start_time",
"sensor.bambup1s_remaining_time",
"sensor.bambup1s_end_time",
"sensor.bambup1s_total_usage",
"sensor.bambup1s_current_layer",
"sensor.bambup1s_total_layer_count",
"sensor.bambup1s_active_tray_index",
"sensor.bambup1s_gcode_filename",
"sensor.bambup1s_task_name",
"sensor.bambup1s_print_type",
"sensor.bambup1s_active_tray",
"sensor.bambup1s_nozzle_size",
"sensor.bambup1s_nozzle_type",
"switch.bambup1s_manual_refresh_mode"
]
So the image.bambup1s_camera
is the problematic entity