@c-soft one question … is it possible somehow to call macros defined in satel integra ?
currently I’m not arming all zones every time but selectively (depending on the situation: are we at home and willing to feel safe or e…g all persons outside house etc.)
It can also be achieve if I would have e.g. a service to ark specific zone only … they I can create some automaton or scenes around it 
Well, I had no idea there are macros there Haven’t tested it out, but I would guess there isn’t any way of doing that, unless you can trigger them by setting some output.
But the use case you’re describing seems like something that arming modes are for - have you checked it out? And arming modes are supported (arm away, arm home etc.)
Hello, so i got a Integra Alarm pannel and i’m having issues connecting to ist the connection is flaky
i’m currently running ETHM-1 Plus module with firmware version > 2.07 does anybody have issues ?
ETHM-1 is using a static IP does anyone have an idea ?
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] Iteration...
2020-06-17 21:46:41 INFO (MainThread) [satel_integra.satel_integra] Not connected, re-connecting...
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] Connecting...
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] sucess connecting...
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] -- Sending data --
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] \xfe\xfe\x7f\x01\xdc\x99\x80\x00\x04\x00\x00\x00\x00\x00\x00\x6d\x59\xfe\x0d
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] -- ------------- --
2020-06-17 21:46:41 DEBUG (MainThread) [satel_integra.satel_integra] Sending 19 bytes...
2020-06-17 21:46:41 WARNING (MainThread) [satel_integra.satel_integra] Got exception: 16 bytes read on a total of None expected bytes. Most likely the other side has disconnected!
2020-06-17 21:46:41 WARNING (MainThread) [satel_integra.satel_integra] Start monitoring - no data!
2020-06-17 21:46:41 WARNING (MainThread) [satel_integra.satel_integra] Start monitoring failed, sleeping for 10s...
2020-06-17 21:46:45 DEBUG (MainThread) [satel_integra.satel_integra] -- Sending data --
2020-06-17 21:46:45 DEBUG (MainThread) [satel_integra.satel_integra] \xfe\xfe\xee\x01\x01\x63\x08\xfe\x0d
2020-06-17 21:46:45 DEBUG (MainThread) [satel_integra.satel_integra] -- ------------- --
2020-06-17 21:46:45 DEBUG (MainThread) [satel_integra.satel_integra] Sending 9 bytes...
2020-06-17 21:46:45 WARNING (MainThread) [satel_integra.satel_integra] Ignoring data because we're disconnected!
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] Iteration...
2020-06-17 21:46:56 INFO (MainThread) [satel_integra.satel_integra] Not connected, re-connecting...
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] Connecting...
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] sucess connecting...
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] -- Sending data --
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] \xfe\xfe\x7f\x01\xdc\x99\x80\x00\x04\x00\x00\x00\x00\x00\x00\x6d\x59\xfe\x0d
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] -- ------------- --
2020-06-17 21:46:56 DEBUG (MainThread) [satel_integra.satel_integra] Sending 19 bytes...
2020-06-17 21:46:56 WARNING (MainThread) [satel_integra.satel_integra] Got exception: 16 bytes read on a total of None expected bytes. Most likely the other side has disconnected!
2020-06-17 21:46:56 WARNING (MainThread) [satel_integra.satel_integra] Start monitoring - no data!
2020-06-17 21:46:56 WARNING (MainThread) [satel_integra.satel_integra] Start monitoring failed, sleeping for 10s...
2020-06-17 21:47:05 DEBUG (MainThread) [satel_integra.satel_integra] -- Sending data --
2020-06-17 21:47:05 DEBUG (MainThread) [satel_integra.satel_integra] \xfe\xfe\xee\x01\x01\x63\x08\xfe\x0d
2020-06-17 21:47:05 DEBUG (MainThread) [satel_integra.satel_integra] -- ------------- --
2020-06-17 21:47:05 DEBUG (MainThread) [satel_integra.satel_integra] Sending 9 bytes...
2020-06-17 21:47:05 WARNING (MainThread) [satel_integra.satel_integra] Ignoring data because we're disconnected!
2020-06-17 21:47:11 DEBUG (MainThread) [satel_integra.satel_integra] Iteration...
2020-06-17 21:47:11 INFO (MainThread) [satel_integra.satel_integra] Not connected, re-connecting...
2020-06-17 21:47:11 DEBUG (MainThread) [satel_integra.satel_integra] Connecting...
2020-06-17 21:47:11 WARNING (MainThread) [satel_integra.satel_integra] Exception during connecting: [Errno 111] Connect call failed ('x.x.x.x', 7090).
2020-06-17 21:47:11 WARNING (MainThread) [satel_integra.satel_integra] Not connected, sleeping for 10s...
2020-06-17 21:47:25 WARNING (MainThread) [homeassistant.components.cloud.google_config] Error reporting state - 5: Requested entity was not found.
2020-06-17 21:47:25 DEBUG (MainThread) [satel_integra.satel_integra] -- Sending data --
2020-06-17 21:47:25 DEBUG (MainThread) [satel_integra.satel_integra] \xfe\xfe\xee\x01\x01\x63\x08\xfe\x0d
2020-06-17 21:47:25 DEBUG (MainThread) [satel_integra.satel_integra] -- ------------- --
2020-06-17 21:47:25 DEBUG (MainThread) [satel_integra.satel_integra] Sending 9 bytes...
2020-06-17 21:47:25 WARNING (MainThread) [satel_integra.satel_integra] Ignoring data because we're disconnected!
2020-06-17 21:47:26 INFO (MainThread) [satel_integra.satel_integra] Not connected, re-connecting...
2020-06-17 21:47:26 DEBUG (MainThread) [satel_integra.satel_integra] Connecting...
2020-06-17 21:47:26 WARNING (MainThread) [satel_integra.satel_integra] Exception during connecting: [Errno 111] Connect call failed ('x.x.x.x', 7090).
2020-06-17 21:47:26 WARNING (MainThread) [satel_integra.satel_integra] Not connected, sleeping for 10s...
2020-06-17 21:47:41 INFO (MainThread) [satel_integra.satel_integra] Not connected, re-connecting...
2020-06-17 21:47:41 DEBUG (MainThread) [satel_integra.satel_integra] Connecting...
2020-06-17 21:47:41 WARNING (MainThread) [satel_integra.satel_integra] Exception during connecting: [Errno 111] Connect call failed ('x.x.x.x', 7090).
2020-06-17 21:47:41 WARNING (MainThread) [satel_integra.satel_integra] Not connected, sleeping for 10s...
Fixed, I used the wrong Port 
1 Like
sorry for late answer … indeed in the alarm panel I see 3 modes (arm: away,home,night) what in general would cover my basic needs, but - to be honest - I do not know how to use it and which exactly zones in satel integra are being armed when I use any of those modes ? is there any option in integra to define that e.g. “arm night” arming zones 1-4 but not 5-7 ?
tried to find something in satem manual but no luck 
could you please guide me ?
when I made few tests … modes away and home arming only zone1 … mode night does nothing
This knowledge is beyond the HA component, it’s about configuration of your SATEL Integra. Judging by your nick I assume you speak Polish. If so, here’s quite good & short read on the subject: https://www.montersi.pl/wsparcie/porada/tryby-czuwania-centrali-integra/
Then once you know what you want to achieve, it’s about proper config in DloadX.
I have my Satel Integra32 finally installed … I am testing with ABAX2 (firmware 6.02) and an APMD250, but the detection in Home Assistant seem to be almost instant when I enable “always on” option in the PIR (I know the batter life will be less ;-)).
Are there any good guides / resources in English?
That DloadX seems very difficult for me to figure out and i’ve procrastinated enough already 
Sorry, I don’t know. Google translate would be your last resource, it’s doing not a bad job these days. Or better yet - https://www.deepl.com/ , these guys are even better sometimes…
@breevesdc
Did you solve this problem? I have the same situation as you, arm / disarm works I can read all statuses, but I can’t control any output.
Unfortunately, no… I was never able to solve this. I think it has something to do with my installation which required the installer to integrate our existing garage doors into the new alarm system. I’m thinking that they applied a workaround solution to achieve this which makes my integration with Home Assistant not work.
I solved: the documentation is incorrect:
code string (optional)
The INTEGRA ID (found in DLOADX under “Communication configuration” or in polish “Komunikacja Konfiguracji” section), it’s needed for making use of the switchable_outputs.
Correctly as follows:
code string (optional)
Access code of any user, or create a separate user for Home Assistan integration.
1 Like
Are you talking about this ID?
Do not use integra identifier in configuration.yaml use one of your users keypad code. For me it was the problem.
ahhhh… I see. OK… I will try that. Thanks a lot for the info. I would be amazed if all of this time that was the blocking point. I will post back here if I get it working. Thanks a lot XSA!
Brian
Arm/Disarm worked even with that code but output triggering not.
For me as well. That’s why I thought the integration was working properly and just my set up was not good for triggering the switchable outputs. Thanks again!
Use the port where the garage door opener is phiscally connected to. According to previous post of yours it is 17 and 18. There is nothing to do with triggering zones.
It worked!!! I can’t believe that it was that simple. I spent hours trying to debug this last year. And following your tip, it was solved in 5 minutes (1 minute to update the code… 4 minutes to restart the HA core).
I owe you a beer XSA! Actually, a six-pack! 
Thanks again for posting your findings here.
Brian
Hello,
Can you help me out? I have my siren on output 1 and would like to know how to turn the siren on or off using Home Assistant.
Thanks!
I figured it out. User pincode to arm/disarm does not work for switchable outputs. You have to use the guardx code.