THOUSANDS of "timeouts", "update fails" and "taking over 10 seconds"

Hey friends,

I am getting thousands and thousands of “timeouts”, “update fails” and “taking over 10 seconds”.

Timeout during authorization

8:52 AM components/switch/broadlink.py (ERROR) - message first occured at March 20, 2019, 11:10 PM and shows up 1960 times

Update for alarm_control_panel.simplisafe fails

8:51 AM components/simplisafe/alarm_control_panel.py (ERROR) - message first occured at March 21, 2019, 11:18 AM and shows up 2450 times

Error doing job: Task exception was never retrieved

8:51 AM components/simplisafe/__init__.py (ERROR) - message first occured at March 21, 2019, 11:18 AM and shows up 2509 times

Updating broadlink switch took longer than the scheduled update interval 0:00:30

8:51 AM helpers/entity_platform.py (WARNING) - message first occured at March 20, 2019, 11:10 PM and shows up 1963 times

Update of switch.night_stand is taking over 10 seconds

8:51 AM __main__.py (WARNING) - message first occured at March 20, 2019, 11:09 PM and shows up 1954 times

Does anyone know what this could be a cause of? I’ve looked into logger but I don’t get much more information besides what is shown here. My system has been running slow and I think this might be the culprit.

Possibly due to a lack of available storage space?

My processor is constantly around 5% with short spikes to 10-20%. My memory usually sits in the 30-50%. And I have about 50% left in my SD card of 32GB. All on RPi3.

These seemed ok for me. Does it seem to high for anyone else?

Sounds about right; your RPi is not starved for resources. Not sure what could be causing the problem.

It’s troubling to see the number of times it fails!
“… first occured at March 21, 2019, 11:18 AM and shows up 2509 times

Looks like it was just a bad switch. I disabled that switch and all other time timeouts (With thousands errors) went away.

What was the bad switch?

It was a Gosund wifi-controlled outlet. I bought several and they are all working great, just seems like one of them is timing out way too much.