did you start z2m (systemctl start zigbee2mqtt)? If so watching the console see if it shows any errors
Is your MQTT broker setup correctly? Have you checked connection with something like MQTT Explorer?
broker i have not checked with explorer since i donβt know how to do but itβs working since i put my shelly on itβs and all is working regulary. now i have finished with nodered, and mariadb too and all seems ok, only zigbee is giving me problem
Also, if you type cd /opt/zigbee2mqtt/data/log in the Zigbee2MQTT LXC console (hit enter) and then type ls (hit enter) is there anything showing?
What type of zigbee stick do you have? Do you know if it came pre-flashed?
CC2538 with onboard CC2592 amplifier yes itβs preflashed with the add on it was working fine
well, I see no reason why it wouldnβt start. If you installed it correctly.
Have you restarted the LXC?
really donβt understand i have done all again and same problem, is possible the path to the key is not correct?
your ls -l /dev/serial/by-id matched your port: in the config 
the only thing that I see different in your configuration.yaml than the example is you left out version: 4 under mqtt:
I think itβs Optional
in new installation i have copyed exactly your configuration, just changed port, mqtt adress, user and pass
you now have pan_id and network_key so it started?
do again
ok why using ipadress:port i donβt see anythig? how i pair devices?
do a cat /opt/zigbee2mqtt/data/log/2022-01-24.16-28-28/log.txt
now try your-lxc-ip:8099