TRADFRI LED2201G8 fails to pair

Trying to replace an old TRADFRI bulb with a new LED2201G8 and getting the following errors:

[2024-08-23 12:22:33] error: 	zh:controller: Interview failed for '0x881a14fffea7666c with error 'Error: Interview failed because can not get active endpoints ('0x881a14fffea7666c')'
[2024-08-23 12:22:33] error: 	z2m: Failed to interview '0x881a14fffea7666c', device has not successfully been paired

I’m using a Zigbee CC2652P Coordinator v4 USB Dongle. Firmware dates back to when I purchased it in 2021 (if that’s the issue).

Anybody seen this issue? Tempted to buy a Sonoff Zigbee coordinator to see it that solves the issue? Not sure how ot update firmware on this CC2652P.

Thanks
Rob

Common sympton when have interference and/or not enough Zigbee Router devices, begin to reading and try following all the best practice tips here → Zigbee networks: how to guide for avoiding interference + optimize using Zigbee Router devices (repeaters/extenders) to get a stable mesh network with best possible range and coverage

That includes a tip to upgrade the Zigbee Coordinator firmware, for Sonoff ZBDongle-P see → ITead's "Sonoff Zigbee 3.0 USB Dongle Plus" (model "ZBDongle-P") based on Texas Instruments CC2652P radio SoC/MCU