TRV schedule to create 4 zones heating

naxus · November 12, 2021, 11:09am

This is first version of blueprint to control TRV in 4 rooms, so I can heat 4 rooms independently.
If you have just one physical heating zone, please be careful and leave one radiator always full open (i have it always open in bathroom and not using TRV on it), to protect you heater when heating with water.
I have TRVs set to manual mode and controlling schedule by HA automation as z2m cannot set schedule on my TRVs itself.

gist.github.com

https://gist.github.com/ondrejbaranek/6fafd0a62a6650c8a849e6320713d8fc

schedule_trv_4zones_6time_frames.yaml

blueprint:
  name: TRV temperature schedule
  description: Set TRV temperature based on 6 timeframes and for 4 rooms (TRVs)
  domain: automation
  input:
    room1:
      name: Room 1
      selector:
        entity:
          domain: climate

This file has been truncated. show original

Any improvements/additions are welcome!

Nomad_of · March 23, 2022, 5:04pm

Hello Naxus,

thank you for your blueprint. I have used it and shrinked it a bit down cause I have only two thermostats.
Did you know how I could rewrite your print, to include also the weekdays? Because my thermostat should be on, on diffrent times between the week.

But I am not the coding guy

Nomad_of · April 2, 2022, 7:49am

Hi there,

I made a simple addition:
under condition just added the weeksdays:

weekdays:
- sat
- sun

I just added this for the first time, this will endable me to start heating at the weekend earlier