Hi all,
I have bought a few WEMOS ESP32 S2 mini, like this one:
https://www.wemos.cc/en/latest/s2/s2_mini.html
I got them into boot mode with the combination of correctly holding and releasing the BOOT and RESET buttons, and the Windows device manager is showing the ESP32-S2, but it says it does not have the correct drivers.
(sorry, it’s German)
I searched around the internet and found that it requires drivers, e.g. CH340 Driver — WEMOS documentation
I downloaded that, ran the install, nothing changed.
I entered the device in the device manager, manually installed the driver from the unpacked folder, was not detected as suitable driver.
Device Manager also shows COM5 when I put the ESP in boot mode:
I searched more and found this: Establish Serial Connection with ESP32-S2 - ESP32-S2 - — ESP-IDF Programming Guide v5.3.1 documentation
They state two different drivers, I have that one for the CP210x platform already because I also have two ESP32 NodeMCU that work flawlessly.
So now I’m a bit lost. I found no info on the internet why the drivers might fail to install 