Where is the installer for the wyoming satellite?

domidom0403 · January 30, 2024, 6:59am

rhasspy/wyoming-satellite/blob/20bbd3cb4f69f26930d8ecb577901472c2df17fd/docs/tutorial_installer.md

# Tutorial with Installer

Create a voice satellite using a Raspberry Pi 3+ and USB microphone and speakers.

## Install OS

Follow instructions to [install Raspberry Pi OS](https://www.raspberrypi.com/software/). Under "Choose OS", pick "Raspberry Pi OS (other)" and "Raspberry Pi OS (Legacy, **64-bit**) Lite".

When asking if you'd like to apply customization settings, choose "Edit Settings" and:

* Set a username/password
* Configure the wireless LAN
* Under the Services tab, enable SSH and use password authentication

## Install Dependencies

After flashing and booting the satellite, connect to it over SSH using the username/password you configured during flashing.

**On the satellite**, make sure system dependencies are installed:

This file has been truncated. show original

It is right under the guide you have used. But i had the same problem to find it at the beginning. Be careful! i had issues to install the driver with the setup tool and only openwakeword works not porcupine. Maybe combine the two guides at least for installing the recommended driver.