Which underfloor heating device/s works well with Home Assistant?

Hi guys, I’ll be putting in underfloor heating under some tiles in a bedroom and en-suite in a few weeks and was after a controller to work with them and home assistant.

Does anyone have any real world recommendations? I guess wifi would be my preferred option but z wave would be ok as well.

Thanks

Stuart

Did you have any luck researching controllers?

There’s certainly nothing obvious - especially if you want to support multiple zones. I’m wondering if it would just be simpler to build your own!

No productive environment yet, however I’m going to use the standard FIBARO Double Switch 2 for this purpose. This way I can control 2 separate zones, with multiple motors, such as this one:


The idea is to have e.g. all bathrooms on one zone, so that one FIBARO relay could control several motors at a time.

Again, nothing in production yet, however this should work well. In case my z-wave networks is going nuts (which typically happens when I’m not meticolous enough in keeping my inventory list up to date), I could still control the heating via the manual valve…