Hi,
I have 2 sdr-rtl dongles. I can see both in Hardware section of HA:
BUSNUM: '001'
DEVNAME: /dev/bus/usb/001/012
DEVNUM: '012'
DEVPATH: /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.1
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-pci-0000_00_15_0-usb-0_1_1
ID_MODEL: RTL2838UHIDIR
ID_MODEL_ENC: RTL2838UHIDIR
ID_MODEL_ID: '2838'
ID_PATH: pci-0000:00:15.0-usb-0:1.1
ID_PATH_TAG: pci-0000_00_15_0-usb-0_1_1
ID_REVISION: '0100'
ID_SERIAL: Realtek_RTL2838UHIDIR_00000001
ID_SERIAL_SHORT: '00000001'
ID_USB_INTERFACES: ':ffffff:'
ID_USB_MODEL: RTL2838UHIDIR
ID_USB_MODEL_ENC: RTL2838UHIDIR
ID_USB_MODEL_ID: '2838'
ID_USB_REVISION: '0100'
ID_USB_SERIAL: Realtek_RTL2838UHIDIR_00000001
ID_USB_SERIAL_SHORT: '00000001'
ID_USB_VENDOR: Realtek
ID_USB_VENDOR_ENC: Realtek
ID_USB_VENDOR_ID: 0bda
ID_VENDOR: Realtek
ID_VENDOR_ENC: Realtek
ID_VENDOR_ID: 0bda
MAJOR: '189'
MINOR: '11'
PRODUCT: bda/2838/100
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 0/0/0
USEC_INITIALIZED: '1033541263853'
and
BUSNUM: '001'
DEVNAME: /dev/bus/usb/001/009
DEVNUM: '009'
DEVPATH: /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-pci-0000_00_15_0-usb-0_1_2
ID_MODEL: RTL2838UHIDIR
ID_MODEL_ENC: RTL2838UHIDIR
ID_MODEL_ID: '2838'
ID_PATH: pci-0000:00:15.0-usb-0:1.2
ID_PATH_TAG: pci-0000_00_15_0-usb-0_1_2
ID_REVISION: '0100'
ID_SERIAL: Realtek_RTL2838UHIDIR_00000001
ID_SERIAL_SHORT: '00000001'
ID_USB_INTERFACES: ':ffffff:'
ID_USB_MODEL: RTL2838UHIDIR
ID_USB_MODEL_ENC: RTL2838UHIDIR
ID_USB_MODEL_ID: '2838'
ID_USB_REVISION: '0100'
ID_USB_SERIAL: Realtek_RTL2838UHIDIR_00000001
ID_USB_SERIAL_SHORT: '00000001'
ID_USB_VENDOR: Realtek
ID_USB_VENDOR_ENC: Realtek
ID_USB_VENDOR_ID: 0bda
ID_VENDOR: Realtek
ID_VENDOR_ENC: Realtek
ID_VENDOR_ID: 0bda
MAJOR: '189'
MINOR: '8'
PRODUCT: bda/2838/100
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 0/0/0
USEC_INITIALIZED: '90518103719'
When I start rtl_433 add-on, all is working fine. When I want to start wmbusmeter add-on, it keeps restarting, I can see in the log:
Started auto rtlwmbus[00000001] listening on t1
Lost 00000001 closing rtlwmbus[00000001]
When I first start wmbusmeter, it works fine, rtl_433 on the other hand, cannot start:
[rtl_433] usb_claim_interface error -6
s6-rc: info: service legacy-services: stopping
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
It looks like both add-ons can only see one and same dongle.
Any idea how can I configure/force them using each one a different one?
Regards,
Maciek