Unitek USB3.0 M.2 SSD (NGFF/SATA) Aluminium Enclosure Model: Y-3365
Works out of the box.
Running Dev 5.2 on two Rpi4-4GB set up with the same enclosure/SSD and have been running solid than any other OS setup I have tried.
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 3.28
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: VLI Product String
usb 2-2: Manufacturer: VLI Manufacture String
usb 2-2: SerialNumber: 000000123ACD
scsi host0: uas
scsi 0:0:0:0: Direct-Access WDC WDS1 20G2G0B-00EP UI50 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk