Wyze sense bridge not recognized?

Hardware
1

I’ve seen multiple posts of people raving about wyze sense sensors, and how seamless the setup is…but I can’t mine to work for the life of me. I’m running raspbian on a raspberry pi 3b…whenever I plug the bridge in I get this:

[   11.477042] usb 1-1.3: USB disconnect, device number 5
[   12.026764] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[   12.157880] usb 1-1.3: New USB device found, idVendor=1a86, idProduct=e024, bcdDevice= 1.0e
[   12.157896] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   12.161098] hid-generic 0003:1A86:E024.0002: hiddev96,hidraw0: USB HID v1.00 Device [HID 1a86:e024] on usb-3f980000.usb-1.3/input0
[   13.269053] usb 1-1.3: USB disconnect, device number 7
[   13.766762] usb 1-1.3: new full-speed USB device number 8 using dwc_otg
[   13.866763] usb 1-1.3: device descriptor read/64, error -32
[   14.086836] usb 1-1.3: device descriptor read/64, error -32
[   14.306766] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
[   14.406771] usb 1-1.3: device descriptor read/64, error -32
[   14.626771] usb 1-1.3: device descriptor read/64, error -32
[   14.746886] usb 1-1-port3: attempt power cycle
[   15.406770] usb 1-1.3: new full-speed USB device number 10 using dwc_otg
[   15.846769] usb 1-1.3: device not accepting address 10, error -32
[   15.946769] usb 1-1.3: new full-speed USB device number 11 using dwc_otg
[   16.386775] usb 1-1.3: device not accepting address 11, error -32
[   16.386876] usb 1-1-port3: unable to enumerate USB device

Has anyone seen this before, or have any ideas of things I could try? Thanks :pray:

2

So, for archeological purposes…FYI it looks like my problem was the power supply. I have a pi3b+ with no other peripherals other than the wyze bridge using what I thought was a good quality 2.4A power supply…I I tried a different 2.4A power supply and the problem became less frequent…so I tried yet another 2.4A power supply and now it seems to be working properly. Apparently the wyze bridge is a little power hungry and my good quality power supplies aren’t as good quality as I thought :slight_smile: I think I’ll pick up a 3A psu just to make sure it’s good.