Xiaomi Gateway Integration

[hijinx (James)]

Add Pushbullet app on your phone.

[mp3llll]

Thanks HIJINX,

But this will not work without the code for it,

For any one that need or want this is the code to get notify

alias: “someone is in the house”
trigger:

platform: state
entity_id: binary_sensor.motion_sensor_158d00013e7a62
state: '255'
platform: state
entity_id: binary_sensor.motion_sensor_158d00013e7a62
state: 'on'
action:
service: notify.my_pushbullet
data:
message: "someone is in the house"
target: "device/LGE Nexus 5X"

[hijinx (James)]

Was just about to paste you these, which have examples:

Examples sending notification depending of the presence

Pushbullet

[ToneStrife]

I’m trying to make device tracker works with the bluetooth of the RPi3. I make it happen but then I lost connection with the Xiaomi Gateway and my bulbs, they become unstables!

Any help? Will it work if I use a USB external bluetooth?

[abmantis]

The bluetooth tracker on the RPi locks up HA. Don’t know if it will work with an external bluetooth dongle. Anyway, not an issue related to Xiaomi.

[BarryHampants (Barry H Pantsworth)]

I’ve been meaning to try this one out but have been waiting until I have a back up in place.

Announcing home_assistant-ble to support bluetooth low energy device tracking for raspberry

Documentation for bluetooth low energy tracker states Don’t use on a Raspberry Pi. It will become unusable slow when using this platform. I’ve noticed that indeed In order to decouple home-assistant and bluetooth (BLE) tracking, I’ve built a very small app called home_assistant-ble. This app can run on any computer (linux at least) with a BLE dongle and sends state changes to home assistant via its (great) api. Feel free to use it for your own raspberry if you want to! I’d…

[kirichkov]

@ToneStrife no, it will not work reliably even with an external dongle.

@BarryHampants I’ve fired it up and it does work without putting stress on the RPI or locking it up. But it does have bugs to iron out

[kirichkov]

New firmware update! It now reports voltage!!! Unfortunately after a power cut it still reports motion if it doesn’t receive any notification from the sensor.

[Danielhiversen (Daniel Høyer)]

With the new firmware, the battery level can now be reported to HA : https://github.com/Danielhiversen/homeassistant/blob/master/components/xiaomi.py#L425

[Lapatoc]

Hello Daniel. Have you had a chance to check if play user defined ringtones option become available?
https://github.com/louisZL/lumi-gateway-local-api/blob/master/网关.md

[ToneStrife]

Can anyone provide me a door open trigger example?

I have tried different commands but imposible to make it work. Thanks.

[BarryHampants (Barry H Pantsworth)]

@ToneStrife

Can anyone provide me a door open trigger example?

First - I’m using this as a sensor

- platform: template
  sensors:
      opening_door:
        friendly_name: 'Front Door Sensor'
        value_template: '{% if states.binary_sensor.door_window_sensor_158d00012aadbd.state == "on"%} Open {%- else -%} Closed {%- endif -%}'

And I have the automation set up as follows.

- alias: 'Front Door Opened'
  trigger:
    platform: state
    entity_id: sensor.opening_door
    to: 'Open'
  condition:
    condition: time
    after: '10:00:00'
    before: '19:30:00'
    weekday:
      - mon
      - tue
      - wed
      - thu
      - fri
      # - sat
      # - sun
  action:
    service: notify.sms_notify
    data:
      message: 'HASS: Front door has been opened. {{now().strftime("%d.%m.%Y-%H.%M")}}'

I think if you use sensor entity as

binary_sensor.door_window_sensor_158d00012aadbd

Your door open state will be ‘on’

to: 'on'

[moskovskiy82]

Battery levels not pushed to rave’s branch yet?

lazcad/homeassistant

[Lapatoc]

Hello Daniel.
I’m using your brach of component. Battery level is shown in debug log but I’m getting following errors:

  17-04-01 14:16:40 ERROR (MainThread) [homeassistant.components.sensor] Error while setting up platform xiaomi
Traceback (most recent call last):
  File "/srv/homeassistant/lib/python3.4/site-packages/homeassistant/helpers/entity_component.py", line 153, in _async_setup_platform
    entity_platform.schedule_add_entities, discovery_info
  File "/usr/lib/python3.4/asyncio/futures.py", line 388, in __iter__
    yield self  # This tells Task to wait for completion.
  File "/usr/lib/python3.4/asyncio/tasks.py", line 286, in _wakeup
    value = future.result()
  File "/usr/lib/python3.4/asyncio/futures.py", line 277, in result
    raise self._exception
  File "/usr/lib/python3.4/concurrent/futures/thread.py", line 54, in run
    result = self.fn(*self.args, **self.kwargs)
  File "/home/homeassistant/.homeassistant/custom_components/sensor/xiaomi.py", line 23, in setup_platform
    devices.append(XiaomiSensor(device, 'Temperature', 'temperature', gateway))
  File "/home/homeassistant/.homeassistant/custom_components/sensor/xiaomi.py", line 36, in __init__
    XiaomiDevice.__init__(self, device, name, xiaomi_hub)
  File "/home/homeassistant/.homeassistant/custom_components/xiaomi.py", line 391, in __init__
    self.parse_voltage(device['data'])
  File "/home/homeassistant/.homeassistant/custom_components/xiaomi.py", line 425, in parse_voltage
    self._device_state_attributes[ATTR_BATTERY_LEVEL] = round(percent)
AttributeError: 'XiaomiSensor' object has no attribute '_device_state_attributes'

[BarryHampants (Barry H Pantsworth)]

Are there any other dependencies besides pycrypto that I might need to install?

I installed debian on a pc today and have got homeassistant up and running after some effort but can’t get xiaomi to connect. I’ve been using an AIO install on a pi up until now with all dependencies spoon fed.

Error in log is

17-04-01 22:44:04 WARNING (MainThread) [homeassistant.setup] Setup of xiaomi is taking over 10 seconds. 17-04-01 22:44:09 ERROR (Thread-1) [custom_components.xiaomi] No gateway discovered 17-04-01 22:44:09 ERROR (MainThread) [homeassistant.setup] Setup failed for xiaomi: Component failed to initialize.

I have the exact same config on a raspberry pi on the same network and it is working. Have tried both branches here and restarted a bunch. Any ideas?

[Lapatoc]

Check your firewall on your host. By default broadcast traffic is blocked. I had same issues on LiteLinux.

[rave (Rave Tam)]

Nice! Time to play around. Since I’ll be out for trip for 2 weeks, any update i will post will likely be not tested. Need a few tester here

[BarryHampants (Barry H Pantsworth)]

@Lapatoc

By default broadcast traffic is blocked

Thank you, for anyone looking…

sudo ifconfig eth0 multicast 

It didn’t actually fix my problem right away but turning off the pi also running hass did. I guess you cant have two instances of hass connected at once.

[bliksem]

Hi,

Mi Home just came out with a new app update and after the updated I stupidly clicked to update the firmware of the gateway to 1.4.1_144.0141.

Now everything has stopped working… They must have changed something. So a warning to others to not update…

Traceback (most recent call last):
File “/srv/homeassistant/lib/python3.4/site-packages/homeassistant/helpers/entity_component.py”, line 153, in _async_setup_platform
entity_platform.schedule_add_entities, discovery_info
File “/usr/lib/python3.4/asyncio/futures.py”, line 388, in iter
yield self # This tells Task to wait for completion.
File “/usr/lib/python3.4/asyncio/tasks.py”, line 286, in _wakeup
value = future.result()
File “/usr/lib/python3.4/asyncio/futures.py”, line 277, in result
raise self._exception
File “/usr/lib/python3.4/concurrent/futures/thread.py”, line 54, in run
result = self.fn(*self.args, **self.kwargs)
File “/home/homeassistant/.homeassistant/custom_components/sensor/xiaomi.py”, line 23, in setup_platform
devices.append(XiaomiSensor(device, ‘Temperature’, ‘temperature’, gateway))
File “/home/homeassistant/.homeassistant/custom_components/sensor/xiaomi.py”, line 36, in init
XiaomiDevice.init(self, device, name, xiaomi_hub)
File “/home/homeassistant/.homeassistant/custom_components/xiaomi.py”, line 391, in init
self.parse_voltage(device[‘data’])
File “/home/homeassistant/.homeassistant/custom_components/xiaomi.py”, line 425, in parse_voltage
self._device_state_attributes[ATTR_BATTERY_LEVEL] = round(percent)
AttributeError: ‘XiaomiSensor’ object has no attribute ‘_device_state_attributes’
17-04-02 01:30:55 ERROR (MainThread) [homeassistant.components.binary_sensor] Error while setting up platform xiaomi
Traceback (most recent call last):
File “/srv/homeassistant/lib/python3.4/site-packages/homeassistant/helpers/entity_component.py”, line 153, in _async_setup_platform
entity_platform.schedule_add_entities, discovery_info
File “/usr/lib/python3.4/asyncio/futures.py”, line 388, in iter
yield self # This tells Task to wait for completion.
File “/usr/lib/python3.4/asyncio/tasks.py”, line 286, in _wakeup
value = future.result()
File “/usr/lib/python3.4/asyncio/futures.py”, line 277, in result
raise self._exception
File “/usr/lib/python3.4/concurrent/futures/thread.py”, line 54, in run
result = self.fn(*self.args, **self.kwargs)
File “/home/homeassistant/.homeassistant/custom_components/binary_sensor/xiaomi.py”, line 36, in setup_platform
devices.append(XiaomiDoorSensor(device, gateway))
File “/home/homeassistant/.homeassistant/custom_components/binary_sensor/xiaomi.py”, line 141, in init
XiaomiDevice.init(self, device, ‘Door Window Sensor’, xiaomi_hub)
File “/home/homeassistant/.homeassistant/custom_components/xiaomi.py”, line 391, in init
self.parse_voltage(device[‘data’])
File “/home/homeassistant/.homeassistant/custom_components/xiaomi.py”, line 425, in parse_voltage
self._device_state_attributes[ATTR_BATTERY_LEVEL] = round(percent)
AttributeError: ‘XiaomiDoorSensor’ object has no attribute ‘_device_state_attributes’

[ToneStrife]

Thanks, I’ll give a try!