Z2M and ZHAproblem with TS0601_soil

Configuration Zigbee
1

Hi, im having problem with this sensor, i have pair with ZHA, used custom_quirkcs and the device works like 2 days or until i reboot HA, and then i have to pair the device again, so, then a i pair with Z2M, and says ok, but i know its not ok cause value is fixed in un number forever.

image
image1590×77 4.75 KB

this is the map, is a really small network to be having interference issues.

image
image741×418 48.3 KB

when i try to interview the devices its says OK, when reconfigure it says error.

image
image339×883 30.5 KB

sorry for the long post, but its strange the device working like that.

2

This has all the markings of an interference issue, Hedda should be by to post his Zigbee troubleshooting guide, or you can look in some of the other posts, but when you are seeing devices fall off or timeout errors, that’s a sign that you are having mesh issues.

3

I agree. Any specific reason you are running both Z2M and ZHA, not just one of them?

4

cause i was having ZHA working, but when i had trouble with this sensor a bought a Z2M ZLB06, so i can test out if its working correctly, but no luck, currently i brought back the sensor to ZHA and the sensor is working fine for now
image

but his will unitl i reboot home assistant, if i do a full reboot or quick reboot, the sensor is lost, and i have to pair it again.

5

and for example, now that i didnt delete from Z2M it now detects that is offline.

image
image1624×72 4.91 KB

6

@tsmithf2020 read and do your best to try following all the tips in this best practice guide before you troubleshoot any deeper as that usually resolves most symptoms like those → Zigbee network optimization: a how-to guide for avoiding radio frequency interference + adding Zigbee Router devices (repeaters/extenders) to get a stable Zigbee network mesh with best possible range and coverage by fully utilizing Zigbee mesh networking